ltech-logo

LTECH E61 Wireless Knob Panel

LTECH-E61-Wireless- Knob-Panel-product

System Diagram

L-BUSLTECH-E61-Wireless- Knob-Panel-product-fig-1

Product Features

  • 2 in 1 function: RF wireless control and PWM power output.
  • Power output, lamps can be connected directly, easy and convenient.
  • With 2 functions: dimming and switch.
  • The touch panel can be controlled by remote directly or smartphone if add a gateway.

Technical Specs

E61 Dimming knob panel

Input Voltage: 12-24Vdc
Wireless Type: RF 2.4GHz
Output Current: 6A×1CH
Output Power: 0~72W…144W
Protection: Short circuit / over current
Working Temp.: -10℃~55℃
Dimensions: 86×86×36mm(L×W×H)
Package Size: 113×112×50mm(L×W×H)
Weight(G.W.): 235g

Product Size

Unit: mm

LTECH-E61-Wireless- Knob-Panel-product-fig-2

Key Functions

LTECH-E61-Wireless- Knob-Panel-product-fig-3

  • Turn the knob clockwise, and the brightness increases. Turn the knob counterclockwise, and the brightness decreases.
  • Turn the knob counterclockwise to the end, the dimmer will be turned off(A click can be heard).

Terminals

LTECH-E61-Wireless- Knob-Panel-product-fig-4

Installation Instructions

LTECH-E61-Wireless- Knob-Panel-product-fig-5

Application Composition

  1. LTECH-E61-Wireless- Knob-Panel-product-fig-6
  2. LTECH-E61-Wireless- Knob-Panel-product-fig-7
  3. LTECH-E61-Wireless- Knob-Panel-product-fig-8
  4. LTECH-E61-Wireless- Knob-Panel-product-fig-9

Wiring Diagram

Connect with 12V strip, Max. 72W; connect with 24V strip, Max. 144W.LTECH-E61-Wireless- Knob-Panel-product-fig-10

5V PWM Signal Output

LTECH-E61-Wireless- Knob-Panel-product-fig-11

Match Code Sequence

LTECH-E61-Wireless- Knob-Panel-product-fig-12

  • PS: No WiFi router is needed when the gateway works with phones directly.

Match Code Sequence

  1. The gateway matches up with the panel, which enables the smartphone to control lamps via a gateway.
  2. Remote match up with the panel, which enables the remote to control lamps.

Match Code between Panel & Remote

LTECH-E61-Wireless- Knob-Panel-product-fig-3

  1. Short press the “ID learning button” on E61, and the lamps flash.LTECH-E61-Wireless- Knob-Panel-product-fig-14
  2. Hold down the On/Off key on F1, or hold down the matching zone’s On & Off keys on F5 simultaneously, if the lamp flashes quickly then back to normal, match successfully.
  • Exit match status automatically if over 15 seconds.
  • One E61 can be matched with a max of 10 remotes.

Match Code between Panel & Gateway

LTECH-E61-Wireless- Knob-Panel-product-fig-15

  1. Press the ID learning button at the back of the panel.LTECH-E61-Wireless- Knob-Panel-product-fig-16
  2. Turn on APP, and enter the “zone set” interface.LTECH-E61-Wireless- Knob-Panel-product-fig-17
  3. Click the right top “MATCH” key, then operate following the prompts.

Clear CodeLTECH-E61-Wireless- Knob-Panel-product-fig-18Long press the “ID learning button” on E61 for 10s until the lamps flash 5 times, clear code successfully.

    • This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any questions. www.ltech-led.com

 

Documents / Resources

LTECH E61 Wireless Knob Panel [pdf] Instruction Manual
E61, Wireless Knob Panel, E61 Wireless Knob Panel

References

Leave a comment

Your email address will not be published. Required fields are marked *