iPad keyboard and case / with touchpad
Item: 22938
Overview
Specifications
Compatibility: iPad 10.9” gen. 10
Keyboard layout: Nordic
Bluetooth version: BT 5.3 (up to 10 m)
Supported OS: iPad OS
Charging time: Up to 3 h
Standby time: 100 days
Working time: Up to 80 h
Size: 249x194x16 mm (excl. iPad)
Weight: 540 g
Wireless frequency: 2402–2480 MHz
Max. radiated power: 20 mW (Max.)
Included: Keyboard case, USB-A to USB-C charging cable, manual
Use
Charging
Connect the included USB-C cable between the keyboard’s charging port and a USB power adapter (sold separately). Connect the USB power adapter to a wall socket. The
Battery indicator lights up red during charging and turns green when the battery is fully charged. The Battery indicator flashes red when the battery level is low.
Power on/off
Turn the keyboard on by sliding the Power on/off switch to “ON”. Slide the switch to “OFF” to turn it off.
Press your tablet to the Foldable magnetic holder and stand to attach it to the keyboard case.
Bluetooth pairing
Press and hold the Pairing button for 2 seconds to enter Bluetooth pairing mode. The Bluetooth indicator starts flashing. Open the Bluetooth settings on your smart device.
Look for “Linocell BTK14” and connect. Pairing occurs automatically the next time you turn on the keyboard.
Standby
The keyboard enters standby mode after 10 minutes of inactivity to save battery power. Press any key to wake it.
Function keys
There are functions or shortcuts assigned to some of the other keys.
Language and keyboard
Backlight brightness.
Press the right-most Option key on the keyboard along with this function button multiple times to cycle between the 3 available backlight brightness modes.
Touch pad gestures
When using the keyboard with iOS and iPad OS (14.5 and higher), extra functionality is added to the touch pad.
Gestures using one finger:
Gestures using two fingers:
Safety information
This product contains a rechargeable Li-ion battery that cannot be replaced. Do not disassemble the product.
Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/22938
Recommended power adpater
To ensure optimal and safe performance, use a CE-certified adapter with these specifications:
- Minimum charging power: 0.1 Watts
- Maximum charging power: 2.5 Watts (for full speed)
Only use adapters meeting these specifications to avoid performance issues or safety risks.
Symbol description
WEEE – Waste Electrical and Electronic Equipment.
This symbol indicates that the product should not be disposed of with household waste within the EU. To protect the environment and human health from potential risks associated with improper disposal, the product should be recycled. Please take the product to an approved e-waste collection point or contact the retailer to ensure responsible handling and recycling.
This product carries the CE mark in compliance with the requirements the Radio Equipment Directive 2014/53/EU and ROHS (2015/863/EU that updated 2011/65/EU).
www.linocell.com
Box 50435, 202 14
Malmö, Sweden
2024-12-18
Documents / Resources
 |
LINOCELL 22938 iPad Keyboard and Case with Touchpad [pdf] Instruction Manual 22938, 22938 iPad Keyboard and Case with Touchpad, 22938, iPad Keyboard and Case with Touchpad, Keyboard and Case with Touchpad, Case with Touchpad, Touchpad |