Linocell 20572 iPad Case with Keyboard
Specifications:
- Compatibility: iPad 10.2 2019/2020/2021, iPad Pro 10.5 2017,iPad Air 2019
- Bluetooth version: 5.0
- Charging time: 2-3 hrs
- Standby time: 100 days
- Runtime with touchpad: 30 hrs, without touchpad: 100 hrs
- Size: 260x195x20 mm
- Weight: 530 g
- Wireless frequency: 2402-2480 MHz
- Transmission power: 20 mW (max)
Product Usage Instructions
Charging:
Connect the USB-C charging cable to the keyboard and a computer or USB power adapter. The charging indicator turns on while charging and turns green when fully charged. Recharge the battery when the indicator starts to flash.
Turn On/Off:
Press and hold the Power button for 3 seconds to turn the keyboard on or off. It enters standby mode after 15 minutes of inactivity. Press any key to wake it up.
Pairing:
Turn on the keyboard and press FN+C to enter pairing mode. The indicator will start flashing. Open Bluetooth settings on your device, look for “Linocell Keyboard,” and connect.
Fn Keys:
Special functions in blue are available through the Fn key (lower left). Press and hold it to activate secondary keys and press your desired key.
Touchpad:
Press the button to turn the touchpad on and off. Use various touchpad gestures like tapping with one, two, three, or four fingers for different actions.
Safety Information:
This product contains a rechargeable Li-ion battery that should not be disassembled. Refer to the manual for safety precautions.
FAQ
Q: How do I know when the keyboard is fully charged?
A: The charging indicator turns green when the keyboard is fully charged.
Q: Can I replace the rechargeable Li-ion battery in the product?
A: No, the Li-ion battery in this product is not user-replaceable.
Specifications
- Compatibility: iPad 10.2″ 2019/2020/2021, iPad
Pro 10.5″ 2017, iPad Air 2019 - Bluetooth version: 5.0
- Charging time: 2-3 hrs
- Standby time: 100 days
- Runtime with/without touchpad: 30 hrs/100 hrs
- Size: 260x195x20 mm
- Weight: 530 g
- Wireless frequency: 2402-2480 MHz
- Transmission power: 20 mW (max)
Charging
Connect the USB-C charging cable to the keyboard and a computer or USB power adapter. The charging indicator turns on while charging and turns green when fully charged. Charge the battery again when the indicator starts to flash.
Turn on/off
Press and hold the Power button for 3 seconds to turn the keyboard on or off.
The keyboard enters standby mode after 15 minutes of inactivity.
Press any key to turn it on again.
Pairing
Turn the keyboard on. Press FN+C to enter pairing mode, the indicator starts flashing. Open the Bluetooth settings on your device. Look for “Linocell Keyboard” and connect.
Fn keys
The special functions outlined in blue are available through the Fn key (lower left). Press and hold it down to activate the secondary keys and press the key of your choice.
HOW TO USE
Touchpad
Press the button 
to turn the touchpad on and off.
Tap with one finger:
left mouse button
Two fingers: Up/ down/slide
Tap with three fingers:
middle mouse button
Three fingers: back to home screen
Tap with two fingers: right mouse
Two fingers:
zoom in and out
Three fingers: switch app to the left
Three fingers: switch app to the right
Tap with four fingers: screenshot
Safety information
This product contains a rechargeable Li-ion battery that cannot be replaced. Do not disassemble the product.
Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/20572
Recommended power adapter
To ensure optimal and safe performance, use a CE-certified adapter with these specifications:
- Minimum charging power: 0.1 Watts
- Maximum charging power: 0.5 Watts (for full speed)
Only use adapters meeting these specifications to avoid performance issues or safety risks
Symbol Description
WEEE – Waste Electrical and Electronic Equipment.
This symbol indicates that the product should not be disposed of with household waste within the EU. To protect the environment and human health from potential risks associated with improper disposal, the product should be recycled. Please take the product to an approved e-waste collection point or contact the retailer to ensure responsible handling and recycling.
This product carries the CE mark in compliance with the requirements the Radio Equipment Directive 2014/53/EU and ROHS (2015/863/EU that updated 2011/65/EU).
www.linocell.com
Box 50435 Malmö
Sweden
2024-11-12
Documents / Resources
 |
Linocell 20572 iPad Case with Keyboard [pdf] Instruction Manual 20572, 20572 iPad Case with Keyboard, iPad Case with Keyboard, Case with Keyboard, Keyboard |