LEDVANCE-logo

LEDVANCE Smart Plus App

LEDVANCE-Smart-Plus-App-product-image

SMART+ Installation Guide

The SMART+ product is a smart home device that can be paired with a partner app for easy control. Follow the steps below to install and use your SMART+ device:

Pairing with Partner App

  1. Download and install the partner app on your smartphone or tablet.
  2. Turn on the SMART+ device and switch it on.
  3. Open the partner app and search for the SMART+ device.
  4. Follow the on-screen instructions to pair the device with the
    app.

WiFi Login
During the pairing process, you will be prompted to connect the SMART+ device to your WiFi network. Follow the on-screen instructions to complete this step.

Troubleshooting

If you experience any issues during installation or use of your SMART+ device, refer to the FAQ section on the LEDVANCE website. You can also contact customer support via email at smarthome-support@ledvance.com.

Decrease Distance FAQ
If you experience issues with the distance between your SMART+ device and your WiFi network, refer to the FAQ section on the LEDVANCE website for tips on how to resolve this issue.

Reset
If you need to reset your SMART+ device, press the on/off button 5 times in quick succession.

Note: The product information is as follows:

  • C10514265
  • G11136721
  • 24.02.2022
  • LEDVANCE GmbH Steinerne Furt 62 86167 Augsburg, Germany
  • Website: www.ledvance.com

INSTALLATION GUIDE

PAIRING WITH PARTNER APP

LEDVANCE-Smart-Plus-App-1

TROUBLESHOOTING

LEDVANCE-Smart-Plus-App-2

DECREASE DISTANCE

LEDVANCE-Smart-Plus-App-3

RESET

LEDVANCE-Smart-Plus-App-4

FAQ

LEDVANCE-Smart-Plus-App-5

CUSTOMER SUPPORT

LEDVANCE-Smart-Plus-App-6

https://smartplus.ledvance.com/faq

CUSTOMER SUPPORT

https://smartplus.ledvance.com/support
smarthome-support@ledvance.com

Hereby, LEDVANCE GmbH declares that the radio equipment type LEDVANCE SMART+ Device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following inter-net address: smartplus.ledvance.com/declaration-of-conformity. Wireless radio used in Zigbee lamps/luminaires/components 2400–2483.5 MHz, max. RF output power 9.5dBm

LEDVANCE-Smart-Plus-App-7

LEDVANCE
GmbH Steinerne Furt 62
86167 Augsburg,
Germany www.ledvance.com

Documents / Resources

LEDVANCE Smart Plus App [pdf] Installation Guide
Smart Plus App, Smart Plus, App
LEDVANCE Smart Plus App [pdf] Installation Guide
Smart Plus, App, Smart Plus App

References

Leave a comment

Your email address will not be published. Required fields are marked *