KT-8112 MasterEASY Single in Kupfer
master Easy
FULL HD – KVM EXTENDER OVER IP
Tune in the easy KVM World
masterEASY Single in Kupfer
Art Nr KT-8112
www.kvm-tec.com
V1020222
Instruction Manual
KT-8112 MasterEASY Single in Kupfer
Check out our Installation Channel:
scope of delivery
LOCAL/CPU Unit
1 x ME1 local (CPU)
1 x plug-in power supply 12V 1A (EU plug)
1 x DVI – DVI cable 1.8m
1 x USB cable 1.8m
1 x VGA – DVi cable 1.8m (optional)
2 x Audio Cable 1.8 m (Opt)
4 x device feet
REMOTE/CON Unit
1 x ME2 remote (CON)
1 x plug-in power supply 12V 1A (EU plug)
4 x device feet
Open OSD main menu
The OSD main menu is displayed with the default Standard shortcut opened: 5 x ALT Gr
(Attention: the first 20 seconds work oned 5 x scroll always if the shortcut was forgotten.
Switching List : CTRL+ALT+PRINT
Changing the shortcuts in the OSD menu Call up the remote settings and then navigate to Keyboard Shortcut.
- Connect the CON / Remote and the CPU / Local Unit to the supplied 12V 1A power supply.
- Now connect the USB cable to a USB socket on your PC and connect the other end of the USB cable to
the CPU / local unit. Connect the keyboard and mouse to the CON / Remote Unit. - Connect the CPU / Local and the CON / Remote with a network cable CAT5e/6/7
- Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU local unit
(PC in). Then connect the monitor with the DVI cable to the CON / Remote Unit. - OPT: Then connect PC Audio/out to Local Audio/in with audio cable. Then connect via the audio cable
the remote audio/out - Almost done OPT: Now use the audio cable to connect Local Audio/out to PC Audio/in and Remote Audio/out to
the audio cable to the microphone - If using a switch: Connect all endpoints to the switch. Make sure all connections are one bandwidth of 1Gbit/sec. For video sharing you need a switch (Layer3) that supports IGMP snooping supports.
HAVE FUN – your kvm-tec extender will now be in use for you for many years (MTBF approx. 10 years).
Use the monitor and keyboard to access the main menu
Access to the main menu:
- Make sure the extenders, monitors, and computers are turned on are.
- Quickly press the Scroll Lock button five times. The main menu (main menu) as well an overview of the submenus is displayed.
- To enter a submenu, press the corresponding button.
Main Menu
Hauptmenü Short Cuts :
| S Status Overview | Menü Status / aktueller Status |
| U Update Flash FW | Firmware aktualisieren |
| F Features Overview | Einstellungen der Features |
| D DDC Option | DDC Option Fixe Einstellung |
| L Local Settings | Einstellungen Local |
| R Remote Settings | Einstellungen Remote |
| A About Overview | Überblick über Extender |
| Taste „Esc“ | Beenden |
DISPLAY THE FIRMWARE VERSION
Make sure the main menu is open. Under “A” – About is the currently installed firmware version of the remote (CON) and local (CPU) extender is displayed.
FEATURES
Pressing the F key takes you to the Features menu.
Switching mode is set by default
FRONT BRIDGING
HARDWARE: 2 SINGLE LOCAL + 1 X DUAL REMOTE
The current status of the extender connection is displayed in the “Status Menu”. The menu shows the information about the connection, the resolution of the video channel and the USB status.
The link status indicates whether a connection is possible. Connected indicates whether the kvm files can currently be transferred.
Video and USB indicate whether data is currently being transferred
BACKBRIDGE
HARDWARE: 1 X DUAL LOCAL + 2 X SINGLE REMOTE
The current status of the extender connection is displayed in the “Status Menu”. The menu shows the information about the connection, the resolution of the video channel and the USB status.
The link status indicates whether a connection is possible. Connected indicates whether the kvm data can currently be transferred.
Video and USB indicate whether data is currently being transferred
| KVM-TEC Gewerbepark Mitterfeld 1 A 2523 Tattendorf Austria www.kvm-tec.com |
KVM-TEC ASIA p +9173573 20204 sales.apac@kvm-tec.com KVM-TEC CHINA P + 86 1360 122 8145 chinasales@kvm-tec.com www.kvm-tec.com |
IHSE GmbH Benzstr.1 88094 Oberteuringen Germany www.ihse.com |
IHSE USA LLC 1 Corp.Dr.Suite Cranburry NJ 08512 USA www.ihseusa.com |
IHSE GMBH Asia 158Kallang Way,#07-13A 349245 Singapor www.ihse.com |
IHSE China Co.,Ltd Room 814 Building 3, Kezhu Road Guangzhou PRC www.ihse.com.cn |
kvm-tec Support
support@kvm-tec.com
Phone: +43 2253 81912 – 30
We are happy to answer your questions
to your installation there?
Manual download www.kvm-tec.com
or
kvm-tec installation channel on our homepage
personal +43 2253 81912
Documents / Resources
 |
kvm-tec KT-8112 MasterEASY Single in Kupfer [pdf] Instruction Manual KT-8112 MasterEASY Single in Kupfer, KT-8112, MasterEASY Single in Kupfer, Single in Kupfer, Kupfer |
