Jam

Zero Chill, Pairable Bluetooth Speaker 100 ft. Range, Waterproof

Zero-=Chill-Pairable-Bluetooth-Speaker-100-ft.-Range-Waterproof-imgg

Specifications

  • Product Dimensions 
    4.57 x 3.7 x 8.46 inches
  • Item Weight 
    1.08 pounds
  • Batteries 
    1 Lithium Ion batteries
  • Connectivity Technology 
    Bluetooth, Auxiliary, USB
  • Speaker Type 
    Built-in
  • Recommended Uses For Product
    Music
  • Mounting Type 
    Plug Mount
  • Brand
    Jam

Introduction

Our newest Bluetooth speaker, Zero Chill, has an extended design and sound that will make you want to skip the live performance. To connect it to the device of your choice, either the aux-in port or the 30-meter/100-foot Bluetooth range. However, since its 22 hours of gameplay would outlast even the wildest gatherings, you will truly have to make a decision.

CONTENTS

Zero-=Chill-Pairable-Bluetooth-Speaker-100-ft.-Range-Waterproof-fig-1

  • Speaker
  • Aux-in cord
  • USB charging cable with spool wrap
  • Quick-Start Guide
  • Welcome card
  • Legal card
  • Jam sticker

CONTROLS

Zero-=Chill-Pairable-Bluetooth-Speaker-100-ft.-Range-Waterproof-fig-2

  • Power on/off/play/pause button
  • Volume up/next track
  • Volume down/previous track
  • LED light indicator
  • Charging cable with spool wrap
  • Aux-in port
  • Charging port

SET UP

CHARGING YOUR SPEAKER
The “Zero Chill” speaker is powered by a rechargeable battery. The speaker comes pre-charged; however, for optimal playtime, make sure to charge before first use.

  • Open the bottom door on the speaker and take out the spool. Unwrap the integrated charging cable, open the door on the side of the speaker, thread the micro USB end through the door, and plug it into the charging port on the speaker.
  • Connect the larger USB plug to your computer or a powered USB AC adapter. An AC adapter is not included in the box, but you can use the one for your cell phone or pick one up next time you’re at the store.
  • When the LED flashes red, it indicates that the battery is low and it’s time to plug in and recharge. Charge for about 3 hours to get up to 22 hours of playtime; while charging, the light will stay solid red. Once fully charged, the LED will turn off.

Zero-=Chill-Pairable-Bluetooth-Speaker-100-ft.-Range-Waterproof-fig-3

USE

TURN ON YOUR SPEAKER
Long press the “play/pause” button for 3 seconds to turn on your speaker.

 

CONNECTING TO A DEVICE
Once turned on, the speaker will immediately search for a device to pair to. If a device has not been previously paired,  the light will switch from blinking blue to blinking red and blue alternately. Enable Bluetooth on your device. From the Bluetooth menu, select “Zero Chill.” When the device and Zero Chill are connected, you will hear a tone and the LED light will turn solid blue momentarily then move to a slow blinking blue. You may also connect your device to Zero Chill using an aux cord, which is included. When plugged in, the light will turn solid red.

Note
 Once paired, the speaker will remember the device every time it is turned on. To disconnect the speaker from the device, hold down the “X” and “play/pause” buttons at the same time, for 2 seconds.

BUTTON FUNCTION
Short press the “play/pause” button for 0.5 seconds to play your music. To increase the volume, short press the “O” button; to lower the volume, short press the “X” button. To skip forward a track, long press the “O” button; to skip back a track, long press the “X” button.

Zero-=Chill-Pairable-Bluetooth-Speaker-100-ft.-Range-Waterproof-fig-4

WATER & DUST PROOF
The smart folks who made this speaker designed it to keep the party going through just about anything (they call it IP67). This means that Zero Chill is dustproof, and submersible in water up to 1 meter (3ft) for 30 minutes. But those designers aren’t miracle workers. Doing something like dropping your speaker from Mount Everest or taking it deep-sea diving will damage your speaker and prevent it from emitting the incredible sounds it is made to. Always keep the side and bottom flaps flush with the speaker when you are using it near water, or it could be damaged.

Zero-=Chill-Pairable-Bluetooth-Speaker-100-ft.-Range-Waterproof-fig-5

CALL HANDLING
While rocking out to your music, if a call comes in, short press the “play/pause” button to pick it up; short press again when you’re done, to hang up. While on a call, if you want to make it private, long press the “play/pause” button to move the call from the speaker to your phone. If a call comes in and you don’t want to pick it up, long press the “play/pause” button to send the call to voicemail.

Zero-=Chill-Pairable-Bluetooth-Speaker-100-ft.-Range-Waterproof-fig-6

See the tables on the following pages for complete button function and LED light indicator interpretation.

PAIR 2 ZERO CHILL SPEAKERS  

  1. Turn on speaker 1 (press and hold the “play/pause”  button for 3 seconds).
  2. Turn on speaker 2 (press and hold the “play/pause” button for 3 seconds).
  3. On both speakers, press and hold the “X” and “O” buttons at the same time for up to 4 seconds and wait for a tone and the lights to blink green.
  4. The speakers will begin to pair together. This will take a few seconds.
  5. The tone prompt will indicate when speakers are paired together.   
  6. Choose “Zero Chill” from your device’s Bluetooth list.
  7. Press the “play/pause” button on either speaker to listen to music. Press “X” and “O” together to toggle between stereo and mono modes.
  8. Once paired, your speakers will recognize each other every time both are turned on. To disconnect Pair 2 mode, press and hold the “X” and “O” buttons for up to 2 seconds. This will enter into pairing mode again.

Zero-=Chill-Pairable-Bluetooth-Speaker-100-ft.-Range-Waterproof-fig-7

Note
 If either of your speakers has been previously paired to a device, or will not pair automatically, press and hold the “play/pause” and “X” buttons on both speakers for 2 seconds to activate pairing mode. You will know they have reached pairing mode by the red and blue blinking light.

LED INDICATORS

CHARGING

Red flash every 5 seconds Low battery
Solid red Charging
LED off Charging complete

IN USE 

Flash blue and red Speaker in pairing mode
Blue flash every 5 seconds Paired with device

BASIC FUNCTIONS

POWER

Power on/off Long press play/pause button

CALLS

Pick up a call Short press play/pause button
Decline a call Long press play/pause button
End a call Short press play/pause button
Move active call from speaker to device Long press play/pause button
Take a second incoming call Short press play/pause button
Decline a second incoming call Long press play/pause button

PAIR 2 SPEAKERS 

Enable Pair 2 Long press X and O buttons simultaneously
Switch between mono & stereo Short press X and O buttons simultaneously

MUSIC  

Play/pause Short press play/pause button
Volume up Short press the O button
Volume down The short press X button
Skip forward a track Long press the O button
Skip backward a track The long press the X button

LEGAL INFORMATION

READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Caution
This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

 

ISEDC RF Exposure Statement
The device is in compliance with RF exposure guidelines; users can obtain Canadian information on RF exposure and compliance.

1-YEAR LIMITED WARRANTY – US & CANADA
WARRANTY – US & CANADA

JAM warrants this product free from defect in material and workmanship for a period of 1 year from the date of purchase. This warranty does not cover damage caused by misuse or abuse, accident, the attachment of any unauthorized accessory, alteration to the product, or any other conditions whatsoever that are beyond the control of JAM. For detailed Warranty instructions and information, visit: www.jamaudio.com/customer-support/warranty-1yr To obtain warranty service on your JAM product, contact a Consumer Relations representative by the telephone number or email address for your country of residence. Please make sure to have the model number of the product available.

For service in the USA Email
cservice@jamaudio.com Tel: 1-888-802-0040
8:30 am–7:00 pm EST M–F
For service in Canada Email:
cservice@homedicsgroup.ca Tel: 1-888-225-7378
8:30 am–5:00 pm EST M–F

For service in Australia Email
cservice@homedics.com.au Tel: 03-87566500
8:30 am–5:00 pm AEST M–F www.jam-audio.com.au  

WARRANTY – UK & EUROPE
JAM warrants this product free from defects in material and workmanship for a period of 2 years from the date of purchase. This warranty does not cover damage caused by misuse or abuse, accident, the attachment of any unauthorized accessory, alteration to the product, or any other conditions whatsoever that are beyond the control of JAM. Distributed in the EU by FKA Brands Ltd, Somerhill Business Park, Tonbridge, TN11 0GP, UK. Tel: 020 3538 0768 Email: uksupport@jamaudio.com

WARRANTY – AUSTRALIA
(1-YEAR LIMITED WARRANTY)
We or Us means HoMedics Australia Pty Ltd ACN 31 103 985 717 and our contact details are set out at the end of this warranty; You means the purchaser or the original end-user of the Goods. You may be a domestic user or a professional user; Supplier means the authorized distributor or retailer of the Goods that sold you the Goods in Australia and New Zealand; and Goods means the product or equipment which was accompanied by this warranty and purchased in Australia and New Zealand.

For Australia
Our Goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled, subject to the provisions of the Australian Consumer Law, to a replacement
or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled, subject to the provisions of the Australian Consumer Law, to have the Goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This is not a complete statement of your legal rights as a consumer.

For New Zealand
Our Goods come with guarantees that cannot be excluded under the Consumer Guarantees Act 1993. This guarantee applies in addition to the conditions and guarantees implied by that legislation.

The Warranty
HoMedics sells its products with the intent that they are free of defects in manufacture and workmanship under normal use and service. In the unlikely event that your HoMedics product proves to be faulty within 1 year from the date of purchase due to workmanship or materials only, we will replace it at our own expense, subject to the terms and conditions of this guarantee. The warranty period is limited to 3 months from the date of purchase for products used commercially/professionally. Terms and Conditions: In addition to the rights and remedies that you have under the Australian Consumer Law, Consumer Guarantees Act of New Zealand, or any other applicable law and without excluding such rights and remedies warranty against defects:

  1. The Goods are designed to withstand the rigors of normal household use and are manufactured to the highest standards using the highest quality components. Whilst unlikely, if during the first 12 months (3 months commercial use) from their date of purchase from the Supplier (Warranty Period), the Goods prove defective by reason of improper workmanship or materials and none of your statutory rights or remedies apply, we will replace the Goods, subject to the terms and conditions of this warranty.
  2. We do not have to replace the Goods under this Additional Warranty if the Goods have been damaged due to misuse or abuse, accident, the attachment of any unauthorized accessory, alteration to the product, improper installation, unauthorized repairs or modifications, improper use of electrical/power supply, loss of power, malfunction, or damage of an operating part from a failure to provide manufacturer’s recommended maintenance, transportation damage, theft, neglect, vandalism, environmental conditions, or any other conditions whatsoever that are beyond the control of HoMedics.
  3. This Warranty does not extend to the purchase of used, repaired, or secondhand products, or to products not imported or supplied by HoMedics Australia Pty Ltd, including but not limited to those sold on offshore internet auction sites.
  4. This Warranty extends only to consumers and does not extend to Suppliers.
  5. Even when we do not have to replace the Goods, we may decide to do so anyway. In some cases, we may decide to substitute the Goods with a similar alternative product of our choosing. All such decisions are at our absolute discretion.
  6. All such replaced or substituted Goods continue to receive the benefit of this Additional Warranty for the time remaining on the original Warranty Period (or 3 months, whichever is the longest).
  7. This Additional Warranty does not cover items damaged
    by normal wear and tear, including but not limited to chips, scratches, abrasions, discoloration, and other minor defects, where the damage has a negligible effect on the operation or performance of the Goods.
  8. This Additional Warranty is limited to replacement or substitution only. As far as the law permits, we will not be liable for any loss or damage caused to property or persons arising from any cause whatsoever and shall have no liability for any incidental, consequential, or special damages.
  9. This warranty is only valid and enforceable in Australia and New Zealand.

Making a Claim
In order to claim under this Warranty, you must return the Goods to the Supplier (place of purchase) for replacement. If this is not possible, please contact our Consumer Relations department by email (cservice@homedics.com.au) or at the address below.

  • All returned Goods must be accompanied by satisfactory proof of purchase that clearly indicates the name and address of the Supplier, the date and place of purchase, and identifies the product. It is best to provide an original, legible, and unmodified receipt or sales invoice.
  • You must bear any expense for return of the Goods or otherwise associated with making your claim under this Additional Warranty.

Distributed in Australia by HOMEDICS AUSTRALIA PTY LTD, 14 Kingsley Close, Rowville, Victoria 3178. Distributed in New Zealand by Phoenix Distribution NZ Ltd, 7B Orbit Drive, Albany / North Shore 0757, Auckland, New Zealand.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING.
WARNING: Do not place speakers too close to the ears. It May cause damage to eardrums, especially in young children.

  • Use this product only for its intended purpose as described in this manual. Do not use attachments not recommended by Jam. Jam is not liable for any damage caused to smartphones, iPod/MP3 players, or any other devices.
  • Do not place or store this product where it can fall or be dropped into a tub or sink without shutting waterproof doors.
  • Do not place or drop into water or any other liquid without shutting waterproof doors.
  • Not for use by children. THIS IS NOT A TOY.
  • Never operate this product if it has a damaged cord, plug, cable, or housing.
  • Keep away from heated surfaces.
  • Only set on a dry surface. Do not place on surfaces wet from water or cleaning solvents if waterproof doors are open.

WARNING
This product has an internal, non-replaceable lithium battery. Please dispose of in accordance with your local, state, province, and country guidelines. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.

BATTERY REPLACEMENT
Your speaker includes a rechargeable battery designed to last the lifetime of the product. In the unlikely event that you should require a replacement battery, please contact Consumer Relations, which will supply details of the warranty and out-of-warranty replacement battery service. This product contains small parts that may present a choking hazard for young children.

CAUTION
 All servicing of this product must be performed by authorized Jam Audio service personnel only. For a complete user guide and to register your product, visit www.jamaudio.com (USA), canada.jamaudio.com (Canada), or uk.jamaudio.com/instructionbooks (UK).

To prevent possible hearing damage, do not listen at high volume for long periods.

WEEE EXPLANATION
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

BATTERY DIRECTIVE
This symbol indicates that batteries must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and health. Please dispose of batteries in designated collection points. Hereby, FKA Brands Ltd, declares that this radio device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from uk.jamaudio.com/DoC.

© 2018 HMDX. All Rights Reserved. JAM is a registered trademark of HMDX. HMDX is a registered trademark of FKA Distributing Co. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HMDX is under license.

Operating frequency band: 2402 – 2480MHz
HX-P606: Maximum radio—frequency power transmitted: -3.07dBm
Distributed by HMDX.
3000 N Pontiac Trail
Commerce Township, MI 48390

Frequently Asked Questions

How is a Zero Chill speaker recharged?
Take out the spool by opening the speaker’s bottom door. Open the speaker’s side door, remove the integrated charging cord from its packaging, and then insert the micro USB end of the cable into the speaker’s charging port. Connect the bigger USB plug to a powered USB AC adapter or your computer.
 
Why won’t my Bluetooth pair?
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
 
How can I tell when the battery on my jam speaker is full?
In roughly four hours*1, charging is finished, and the indicator turns off. The built-in lithium ion battery is fully charged if the CHARGE indication remains off when the speaker power is off and connected to an AC outlet.
 
How is a Jam Zero Chill speaker reset?
Press and hold the play/pause button for approximately five seconds, or until you hear a sound or see a red light flashing, to reset your speaker. Restoring the speaker to factory defaults clears the speaker’s memory of any associated Bluetooth devices.
 
How does jam connect?
Your wireless router’s WPS button should be depressed. After two minutes, push the WiFi button on the JAM WiFi Speaker’s back. The speaker will announce “WiFi connected” once it has established a connection.
 
How is a jam speaker charged?
The speaker can be charged using either a wall outlet or your computer. Since charging the speaker is so simple, you’ve probably figured it out by now, but just in case, you have two options. For a party lasting up to 5 hours, the Classic 2.0 requires roughly 2 hours. 1.

References

Leave a comment

Your email address will not be published. Required fields are marked *