iTOONER
IPC Split Screen Decoder
【 ND7008 & ND7016 Product Manual】
Compatible with Hikvision,Dahua IPC Split screen
Decoding Channels:
◎ ND7008
Decoding 9 channels
◎ ND7016
Decoding 16 channels
Use application
Installation And Use
① Device access
IPC Split screen decoder, through a network cable to access networked PoE/Core network switch Connect to the corresponding display via VGA or HDMI interface for intelligent split-screen display USB mouse, then sub-control center system operation can be performed.
IPC Split screen decoder IP address setting
Enter the IPC split-screen decoder operation interface, right-click the mouse to operation menu, select click Main menu (user name: admin password: empty) Enter [System]
Select [NetService]
Go to [Network Settings] and change to the IP address of the same network segment.
IPC Split screen decoder System Setting
Enter the IPC split-screen decoder operation interface, right-click the mouse to the operation menu, select click [Quick set] Enter [Digital Channel Configuration]. Main Menu
According to the desired screen, add and delete IPC addresses, and enter [Digital Channel Configuration] to select [ONVIF]select an IPC channel, manually add the protocol to [ONVIF], and change the port to [9988] or [80], the username and password are the IPC account password and the IPC setting is completed.
Click [Search] to select the IPC that has been set, click [Quick set] to complete the setting, click [Apply] can complete the IPC split-screen display.
Reminder
- When adding IPC will appear user password, please go to the computer to access the corresponding brand page to access the IPC and obtain the IPC user password.
- Hikvision IPC you can go to [Configuration – System – Security Management – Security Service] to uncheck the function [Enable illegal login lock]. then save it.
- You can go to [Settings – Network Settings – Connections] to turn off the function [ONVIF Validation] and save it.
- After the sub-control room corresponding camera, IP address is added, the system operation password should be increased. Non-management personnel is not allowed to adjust the screen at will.
- Power adapter requirements: DC 12V1A, DC is 5521 interface, this device does not include a power adapter.
Packing list
| Number 1 |
Name | Unit Quantity | Remark | |
| IPC Split screen decoder | Station | 1 | ||
| 2 | Wired Mouse | One | 1 | |
| 3 | Instructions | Share | 1 | |
Note: Due to different machine configuration, the accessories are different, please refer to the actual product.
Documents / Resources
 |
iTOONER ND7008 IPC Split Screen Decoder [pdf] User Manual ND7008, IPC Split Screen Decoder |
