IRONRIDGE A2 Racking Accelerated Flush Mount
Specifications
- Rail Sizes: A1 Rail, A2 Rail
- Finishes: Black-anodized, Mill
- Certifications: Listed to UL 2703
- Warranty: 25-year warranty
- External Load: A1 – 150 PSF, A2 – 180 PSF
- Rail Span Between Attachments: A1 – 4′ to 8′, A2 – 10′ 4″
- Snow Load: A1 – 20 PSF, A2 – 30 PSF
- Wind Load: A1 – 150 MPH, A2 – 180 MPH
Product Usage Instructions
Glove-Friendly Components
Our product is designed with components that are glove-friendly for easy handling and installation.
One-Tool 1/2 System
The one-tool 1/2 system simplifies the installation process by allowing you to use a single tool for most tasks.
Fully-Certified Cable Tray
Ensure that the cable tray is fully certified before installation to maintain the system’s integrity and safety.
Hassle-Free Rail Alignment
Our rail system is designed for hassle-free alignment, making the installation process smoother and more efficient.
Rail Selection
Choose between the A1 Rail and A2 Rail based on your specific load conditions. A1 Rail is suitable for most conditions, while A2 Rail is recommended for heavy-snow and high-wind regions.
Easy Hardware & Wire Placement
The design of our product allows for easy placement of hardware and wires, ensuring a tidy and secure installation.
Mobile Resources
For more detailed information and certification letters, please visit IronRidge.com.
FAQ
- Q: What is the warranty period for the product?
A: The product is backed by a 25-year warranty. - Q: How do I choose between the A1 Rail and A2 Rail?
A: The A1 Rail is suitable for most load conditions, while the A2 Rail is recommended for heavy-snow and high-wind regions. - Q: Is the rail system listed to any certifications?
A: Yes, the rail system is listed to UL 2703 certification.
Racking Accelerated™
Aire® is a carefully-engineered, ergonomic racking system for pitched roofs—honoring both speed and precision. Each component has been designed to enforce a quality installation that can withstand the elements. We’ve worked hand-in-glove with installers to provide the strongest, feature-rich, open-channel rail on the market. Two rail sizes come in black-anodized and mill finishes. Listed to UL 2703 and backed by a 25-year warranty.
Aire® Flush Mount System
Two Optimized Aire® Rail Sizes
A1 Rail meets most load conditions, while the heftier A2 Rail is best in heavy-snow and high-wind regions.
Internal Bonded Structural Splices
Aire® Ties connect two pieces of rail together without penetrations. Its water-relief “bridge” allows drainage.
Easy Hardware & Wire Placement
Quarter turn and Aire Lock® clamps stand freely. Wire Clips press in, with a flat-head slot for quick removal.
Aesthetically-Pleasing Hidden Ends
Aire Lock® Stealth clamps module row ends. With a 15° angled bolt, rail cuts are not needed for access.
Rail Selection
The provided table* illustrates span differences for Aire® A1 and A2 Rails. It was prepared in compliance with applicable codes and standards. Values based on the following criteria: ASCE 7-16, Gable Roof Flush Mount, Roof Zones 1 & 2e, Exposure B, Roof Slope of 8° to 20° and Mean Building Height of 30 ft. Visit IronRidge.com for detailed certification letters.
*Table is for illustration purposes only. Use approved certification letters for actual design guidance.
© 2024 IronRidge, Inc. All rights reserved. Visit www.ironridge.com or call 1-800-227-9523 for more information. Version 1.01
Documents / Resources
 |
IRONRIDGE A2 Racking Accelerated Flush Mount [pdf] Instruction Manual A2 IronRidge Flush Mount, A2, IronRidge Flush Mount, Flush Mount |
