INt-2104AG Interact Application Guide User Guide

The Interact Smart Lighting System is designed to provide high-quality, energy-efficient lighting for various applications such as offices, education facilities, healthcare centers, retail spaces, and industrial settings.

Components:

The system includes luminaires with integrated sensors, a switch, and the Interact Pro app for seamless control and customization of lighting settings.

Architecture:

The system architecture includes enterprise features like the Interact IOT platform, BMS system, gateway, and add-on devices for advanced functionalities such as BACNet integration and wireless control.

Features:

Logical grouping & zoning
Occupancy modes & Switch on/off behaviors

Daylight Regulation
Manual Controls

Scheduling (requires a gateway)
Load shedding / Demand Response (requires a gateway)

Sensor Installation:

Enhance your smart lighting system with stand-alone wireless multi-sensor or integrated multi-sensor options. These sensors trigger automatic responses based on occupancy detection and daylight variation, leading to greater energy savings and enhanced control possibilities.

Motion Detection Area:

With Stand-alone Sensor: 3.6m – 5.4m

With Integrated Sensor: 1.9m – 2.9m

Daylight Detection Area:

With Stand-alone Sensor: h = max. 2.8m, min. 0.7 x h

With Integrated Sensor: h = max. 2.8m, min. 0.6 x h

Light Level:

1.4 x h lux for Max Light Output

FAQs

Q: What are the key features of the Interact Smart Lighting System?

A: The system offers high-quality lighting with integrated sensors, energy-saving capabilities, and easy installation. It also provides advanced control options through the Interact Pro app.

Q: How can I enhance the system with additional sensors?

A: You can easily add stand-alone wireless multi-sensors or integrated multi-sensors to automate lighting responses based on occupancy and daylight conditions.

PRODUCT INFORMATION

Office lighting needs to facilitate the day-to-day life of people. It must provide great visual comfort and ambiance, without consuming more energy than needed. The Interact system was developed to deliver high-quality, instant-on light that saves energy, is easy to install, and is future-proof.

Ideal for refurbishment and new buildings – no additional control wires needed
Fast Installation – after mounting of luminaire and controls, the system is ready to use in a few clicks
High flexibility – customization of the system is possible at any time
Perfect for every project size – no light point restrictions
No additional cost – system configuration via free Interact Pro App
No local customer IT-Network integration needed –commissioning via smartphone app and Bluetooth
Upgrade is possible at any moment by simply adding a gateway to access additional benefits such as the connection of multiple user devices and analytics dashboard.

Interact for office applications architecture

Sequence of operations

Lighting

Interact ready luminaires or retrofit kits with integrated wireless occupancy & daylight sensors.
UL924 emergency control capabilities via luminaire integrated battery backup or via UL924 emergency shunt relay.
- Upon emergency, the UL924 shunt relay bypasses the sensor and forces the lights to 100% level.
- Option to select ER100 or GTD UL924 approved devices on the luminaire spec sheet.
System bridge accessory with integrated wireless occupancy & daylight sensors and wired to the 0-10V downlight circuits.
20 Amp Interact RF switch relay wired to each 0-10V circuit for integration with generic 0-10V fixtures.
20 Amp Interact RF switch relay wired to dedicated receptacles.

Logical grouping & zoning

Use IR remote and Interact Pro App for configuration
- Up to 200 wireless devices per network
- Up to 64 groups and zones
- Up to 40 lights & 5 ZigBee Green Power (ZGP) devices per group
- Up to 16 scenes per group

All lights, switches, sensors, and plug load controllers are grouped together.
A dedicated daylight zone for lights near the window.
A dedicated zone for whiteboard fixtures or projector

A dedicated zone for the general area

High-end trim

Range 0% to 100%, out of the box, set to 100%.

Option to select alternate value via the App.

Occupancy modes & Switch on/off behaviors

Option to change the switch on/off behaviors in the configuration App.

Option to select one of 5 Area-based configurations where all lights in the group have the same light level irrespective of occupancy pattern within that group.
- Area Manual on Manual off (default)
- Area Manual on Auto Off
- Area Manual On Auto Off with Daylight Dependent Regulation (DDR): DDR per luminaire in the zone(s) for sensor-based luminaires
- Area Auto on Auto Off
- Area Auto on Auto Off with Daylight Dependent Regulation (DDR): DDR per luminaire in the zone(s) for sensor-based luminaires

Option to select Individual light-based behaviors for an adaptive dimming feature where light levels adapt to occupancy pattern within that group.
- Light Auto On Auto Off: adaptive dimming without daylight regulation
- Light Auto On Auto Off with DDR: adaptive dimming with daylight regulation

Option to set vacancy level to any value between 0% to 100%.
Configurable sensor timeouts
- Hold time (T3* to T4*) configurable from 5 min to 60 min
- Prolong time (T5* to T6*) configurable from 0 min to 30 min

Daylight Regulation

Must create a dedicated daylight zone to activate daylight regulation. Daylight calibration is required.

Option to disable daylight regulation by selecting a non-DDR switch on/off behavior in the configuration App
Individual luminaire performing daylight dimming in the zone.
Continuous dimming to OFF via the daylight sensor.

Manual Controls

4 button switch
- Button 1 set to ON & ramp up
- Button 2 & 3 set as programmable scenes
- Button 4 is set as OFF & ramps down
2 button switch
- Button 1 set to ON & ramp up
- Button 2 set to OFF & ramp down

Scheduling (requires a gateway)

Set specific action (ON / OFF or Scene recall) per lighting group based on specific day and time inputs.
Schedules can be created and managed by using both the app and the portal.
Load shedding / Demand Response (requires a gateway)

Requires installation and configuration of an EISS box (EISS Box Set Up – IPKeys Technologies)
Configure load reduction level and active time using the Interact Pro Portal

Optional additional features:

Gateway:

Energy monitoring, reporting & lighting asset performance information, and time-based schedules are available through LCN1840.
Automatic demand response is available through LCN1870 and the EISS box.

Gateway + IoT:

BACnet integration, energy monitoring, reporting & lighting asset performance information, and time-based schedule available through LCN1850 + LCN1860.
Access to Space Management and Productivity IoT Applications and rich data sets through the SC1500 sensor bundle

Sensor installation guidance

Easily enhance your smart lighting system with the stand-alone wireless multi-sensor or integrated multi-sensor, which are Interact Ready. They trigger automatic responses to turn on, off or dim the lights according to occupancy detection and daylight variation. The result? Greater energy saving, more control possibilities and a more adaptable space!

Motion detection area

Daylight detection area

System behavior

Classroom with luminaire-integrated sensors

Classroom with external wireless sensors

Meeting room with downlights and linear

Meeting room with troffers and linear luminaires with integrated sensors

Private office with troffers

Corridor Instructions

Corridor with troffers and integrated sensors

Corridor with downlights and System bridge accessories

Corridor with downlights and RF switch relay

Open office with troffers

Open office with linear luminaires and troffers with integrated sensors

Restroom with troffers

Collaboration areas

Parking indoor Led fixtures

Parking lot with poles and indoor fixtures

Parking garage with LED fixtures with integrated sensors

Contact information

Questions about Interact? Contact us directly.

https://www.interact-lighting.com/en-us/get-in-touch or

General inquiries: 1-833-468-7776,
Field support: 1-800-555-0050
(Monday – Friday, 8 am – 8 pm EST)

Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract unless otherwise agreed by Signify

Documents / Resources

interact INt-2104AG Interact Application Guide [pdf] User Guide
INt-2104AG Interact Application Guide, INt-2104AG, Interact Application Guide, Application Guide, Guide

References

User Manual

INt-2104AG Interact Application

Specifications

Product Usage Instructions