Ink 1IN1 Wireless Microphone Type-C Receiver

Product Information

Specifications

• Compliance: FCC Part 15
• Interference: None
• RF Exposure: General RF exposure requirement met
• Portability: Can be used in portable exposure conditions without restriction

Product Usage Instructions

FCC Warning
This device complies with part 15 of the FCC rules. To ensure proper operation, please follow these guidelines:

1. Do not cause harmful interference.
2. Accept any interference received, including interference that may cause undesired operation.
3. Do not make any changes or modifications to the device that are not expressly approved by the party responsible for compliance. Unauthorized modifications could void the user’s authority to operate the equipment.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. This means that you can use the device in a portable exposure condition without any restrictions. However, it’s always important to follow best practices for RF exposure safety, such as maintaining a safe distance from the device and limiting prolonged exposure.

Frequently Asked Questions (FAQ)

• Q: What does FCC Part 15 compliance mean?
• A: FCC Part 15 compliance ensures that the device meets the Federal Communications Commission’s regulations regarding electromagnetic interference. It means that the device has been tested and certified to operate without causing harmful interference to other devices.
• Q: Can I modify the device?
• A: No, you should not make any changes or modifications to the device that are not expressly approved by the party responsible for compliance. Unauthorized modifications can potentially affect the device’s performance and may void your authority to operate it.
• Q: Is there any restriction on using the device in a portable exposure condition?
• A: No, the device can be used in a portable exposure condition without any restrictions. However, it is always recommended to follow RF exposure safety practices, such as maintaining a safe distance from the device and limiting prolonged exposure.

Introduction

Thanks for choosing our product. This product is a smart wireless microphone that provides professional-grade recording output, Plug, and play no app required, and Multiple usages: it can be used in online live broadcasts, video vlog shooting, program interviews, recording, video teaching, and other occasions. The wireless microphone consists of two parts, one is a microphone transmitter, and the other one is an Apple receiver(See as below picture)

ID Illustration

1. Windproof net
2. Microphone indicator
3. Microphone charging port
4. Microphone clip
5. Switch button
6. Apple port to connect the phone
7. Receiver Indicator
8. Reset the key of the receiver
9. Apple port of receiver

*The microphone is equipped with a built-in battery, which can be used only after being charged. The power of the Apple receiver is supplied by the phone (the Apple port is for phone charging)

How to use

• Step 1: Connect the receiver to the phone with an Apple port. The connection is successful if the phone displays a small icon.
• Step 2: Press the switch button of the microphone, the indicator will turn green, and then the power is turned on.
• Step 3: The indicator red light of the receiver keeps always on, open the phone camera, live app other apps, and then use the microphone to receive sounds.

Special Note:
For the use of the receiver port: there is no battery in the Apple rec- eiver, and no need to recharge during life, if the phone has low power during live, it can be recharged through the receiver port.

About Ul

Microphone Transmitter

Apple Receiver

Packing list
Content of packing:

1. Microphone transmitter
2. Apple receiver
3. Lightning charging cable
4. User manual.

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

MADE IN CHINA

Documents / Resources

Ink 1IN1 Wireless Microphone Type-C Receiver [pdf] User Manual 1IN1 Wireless Microphone Type-C Receiver, 1IN1, Wireless Microphone Type-C Receiver, Microphone Type-C Receiver, Type-C Receiver, Receiver

References

• User Manual