ifi SupaNova User Guide

Overview

1. EC (male)
   Plug into a wall outlet that supplies power to audio equipment, or plug into a power extension block that supplies power to audio equipment.
2. Polarity/Earth detection
   The following table depicts the different readings and the respective LED colour combinations. Where needed, make the necessary system adjustments.

   	Polarity (LED)	Earth (LED)	Status
   1	Green	Green	Normal
   2	Red	Green	Polarity error. Live and Neutral connections are reversed.
   3	Red	Red	Ground error. Earth is missing or faulty (e.g. resistance too high).
   4	Off	Off	Cut-out mode. Over voltage or an electrical short.

   Tips: Regardless of the LED colour, the SupaNova will always be actively cancelling noise.

3. Power outlet IEC
   Connect to your device.

Specifications

• Noise reduction: > 40dB (> 100x)
• Surge Protection: max. 10,000A @ 775V / 8/20uS
• Under operating voltage: Maximum operating rating 10A at 250Vac and 15A at 125Vac
• Dimensions: 1.8 m (70.8″)
• Net weight:
  • USA: 675 g (1.43 lbs)
  • EUR: 695 g (1.47 lbs)
• Warranty period: 12 months

Specifications are subject to change without notice.

ifi-audio.com

Documents / Resources

ifi SupaNova [pdf] User Guide SupaNova

References

• User Manual