Installation of your
Operator and printer
Operator And Printer
Your preparations
Find a space for your Operator and printer
Find a suitable place for the Operator and printer. Look for a central location in the kitchen or near your mise-en-place station.The Operator should be mounted at eye level or just below.The Operator is heavy and has to be installed on a brick or concrete wall.
Internet connection
Cable for internet (UTP Patch)
Connection to modem/router
Power supply
2 sockets are required, one close to the wallmount. One close to the printer
* You should have this available and working before installation.
This is what we are bringing and installing
Mounting
Documents / Resources
 |
Horeko Operator And Printer [pdf] User Guide Operator And Printer, Operator And Printer, And Printer, Printer |