Honeywell TC500A TC Thermostat Configuration Wizard
Product Information
Specifications
- Product Name: Honeywell TC Thermostat Configuration Wizard
- Compatibility: Works with Niagara N4 software
- Device Type: BACnet device
ABOUT THIS GUIDE
- This document provides instructions to install the TC Series thermostat configuration wizard.
- To take full advantage of the information in this guide, users must have training or experience working with the Niagara N4 software.
NOTE:
Fig. 1 shows Thermostat Configuration Wizard for TC500A, Same setting applicable for TC300 also.
Prerequisites
Table 1 Prerequisites
| Parameter | Description |
|
Software requirement |
Niagara workbench.
For compatibility information, refer to the latest software release notes. |
| Google Chrome web browser | |
|
Modules |
• honeywellTCThermostatWizard-rt
• honeywellTCThermostatWizard-ux • honeywellTCThermostatWizard-wb • honeywellBacnetDeviceManager-rt • honeywellBacnetDeviceManager-wb • honeywellDeviceManager-rt.jar • honeywellDeviceManager-wb.jar |
Licenses
The TC Series wizard does not require additional licensing apart from the controllers or supervisor license.
Installing TC Thermostat Configuration Wizard Modules on the Controller
NOTE:
The installation procedure for the TC500A and TC300 thermostats is the same. Configuring the TC500A is shown in this document for reference.
The configuration procedure for the TC300 is the same as the configuration procedure for the TC500A.
- Connect to the Platform and double click on the Software Manager.
- Select and install the ‘honeywellTCThermostatWizard’ module.
Status must change from “Not Installed” to “Up to Date.” - Launch the station.
Adding the TC Series Device to the Station
Install the modules on the controller as described above and connect to the station.
NOTE:
The TC Series Thermostat Configuration Wizard is a BACnet device. Add and configure a BACnet network before adding it to the station.
- Navigate to Window > Side Bars > Palette to open the palette pane. The palette pane displays on the lower-left side.
- Click on the
(Open Palette) option to display the palette window. - Type’ honeywellTCThermostatWizard’ in the filter field, select the module and then click Ok.
- 4. Using the palette, navigate to the ‘honeywellTCThermostatWizard’ module in the workbench.
NOTE:
A user can use the workbench or a browser to configure the TC Series Thermostat Configuration Wizard via the configuration wizard.
- Drag and drop the TC500 or TC300 device under the Station > Config > Drivers > BacnetNetwork in the Nav tree.
- Double-click on the TC500 or TC300 device to open the configuration Wizard.
NOTE:
To avoid the [web.reporting.csp] error in the application director output, navigate to Services > WebService > HttpHeaderProviders > Content- SecurityPolicy and configure the font-src property with the following text ‘self’ workbench data:
Applicable Technical Literature
Table 2 Technical Literature
| Document Name | Document Number |
| TC Thermostat Configuration Wizard User Guide | 31-00490 |
| TC500 Thermostat BAcnet Integration Guide | 31-00478 |
| TC300 Thermostat BACnet Integration Guide | 31-00646 |
The material in this document is for information purposes only. The content and the product described are subject to change without notice.
Honeywell makes no representations or warranties with respect to this document. In no event shall Honeywell be liable for technical or editorial omissions or mistakes in this document, nor shall it be liable for any damages, direct or incidental, arising out of or related to the use of this document. No part of this document may be reproduced in any form or by any means without prior written permission from Honeywell.
Honeywell Building Technologies
715 Peachtree Street, N.E.,
Atlanta, Georgia, 30308,
United States.
buildings.honeywell.com
® U.S. Registered Trademark
©2024 Honeywell International Inc.
31-00489-02 I Rev. 12-24
FAQ
- Q: Is additional licensing required for the TC Series wizard?
A: The TC Series wizard does not require additional licensing apart from the controllers or supervisor license. - Q: How to avoid the [web.reporting.csp] error during configuration?
A: To avoid the error, navigate to Services > WebService > HttpHeaderProviders > ContentSecurityPolicy and configure the font-src property with ‘self’ workbench data.
Documents / Resources
 |
Honeywell TC500A TC Thermostat Configuration Wizard [pdf] User Manual TC500A, TC300, TC500A TC Thermostat Configuration Wizard, TC500A, TC Thermostat Configuration Wizard, Configuration Wizard, Wizard |