GRANDSTREAM GCC6010, GCC6011 SMB UC/Networking Convergence Wired Gateway
- Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor, Boston, MA 02215. USA Tel: +1 (617) 566 – 9300 www.grandstream.com
- For Certification, Warranty and RMA information, please visit www.grandstream.com
PACKAGE CONTENT
GCC6011
GCC6010/6011 PORTS
- 2.5G SFP Port
- USB 3.0 Port
- Ethernet Port
- DC48V
- RESET
- Micro SD
- Grounding terminal
- Kensington Lock
CONNECTING THE GCC6010/6011
- GCC6010: Ports with this symbol are configured to be used as a WAN port by default at the factory.
- The default password information is printed on the MAC label on the bottom of the unit. The default username is “admin”.
MOUNTING GCC6010/6011 TO THE WALL
INSTALL ON A 19” STANDARD RACK (GCC6011)
GROUNDING THE DEVICE
- Ground Terminal
- Ground Bar
SSD INSTALLATION (GCC6011)
The GCC6010/GCC6011 is not pre-configured to support or make emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”), or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GCC6010/ GCC6011 to use that service, and periodically test your configuration to confirm that it works as you expect. It is also your responsibility to purchase traditional wireless or landline telephone services to access Emergency Services.
GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE GCC6010/GCC6011. NEITHER GRANDSTREAM NOR ITS OFFICES, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE GCC6010/GCC6011 TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH.
The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the device at my_device_ip/gpl_license. It can also be accessed here: https://www.grandstream.com/legal/open-source-software. To obtain a CD with GPL source code information, please submit a written request to info@grandstream.com
FAQs
Can the GCC6010/GCC6011 be used to contact emergency services?
No, Grandstream does not provide connections to emergency services via the GCC6010/GCC6011. Users are advised to make alternative arrangements for accessing emergency services.
How can I access the GNU GPL license terms for the device?
The GNU GPL license terms are accessible via the Web user interface of the device at my_device_ip/gpl_license. Alternatively, you can visit Grandstream’s website or request a CD with GPL source code information by emailing info@grandstream.com.
Documents / Resources
 |
GRANDSTREAM GCC6010, GCC6011 SMB UC/Networking Convergence Wired Gateway [pdf] Installation Guide GCC6010, GCC6011, GCC6010 GCC6011 SMB UC Networking Convergence Wired Gateway, GCC6010 GCC6011, SMB UC Networking Convergence Wired Gateway, Networking Convergence Wired Gateway, Convergence Wired Gateway, Wired Gateway, Gateway |