Geehy APM32E103ZE Mini Development Board

Performance

• 32 bit Arm® Cortex® M3
• Max frequency: 120MHz
• Flash: 512KB
• SRAM: 128KB

Interface and Resources

• USB: 1(Type B)
• JTAG/SWD: 1
• LED: 2
• KEY: 2
• RESET KEY: 1
• SWD interface: 1
• GPIO: 108
• USART: 1 (Switch to USART1 or USART2 by jumper)

Start

1. Ensure a solid connection for jumper J6,J7, J8, J9,J10and J15.
2. Connect the USB in development board with PC by a Type B cable and power the development board.
3. Connect the emulator with SWD interface for MCU programming and debugging.

System Requirements

• Windows OS (7/8/10)

Development Tool

• Keil: MDK ARM

Appearance

Schematic Diagram

Refer toAPM32E103ZE MINIBOARD V1.0 PDF

Geehy Semiconductor Co.,Ltd.
Bldg.1, No.83 Guangwan Street, Zhuhai, Guangdong, China

86 0756 6299999
www.geehy.com

Documents / Resources

Geehy APM32E103ZE Mini Development Board [pdf] User Manual APM32E103ZE Mini Development Board, APM32E103ZE, Mini Development Board, Development Board, Board

References

• User Manual