FRIGIDAIRE EFIC220-BLACK-6COM Touchscreen Nugget Ice Maker

INTRODUCTION

Welcome to our family: Thank you for bringing Frigidaire into your home! We see your purchase as the beginning of a long relationship together. This manual is your resource for the use and care of your product. Please read it before using your appliance. Keep it handy for quick reference. If something doesn’t seem right, the troubleshooting section will help you with common issues. FAQS, helpful tips and videos, cleaning products, and kitchen and home accessories are available at www.frigidaire.com.

• When you unpack your ice maker, you may find a small amount of water inside.
• Your unit is brand new.
• Any water you may find is from the standard quality control testing that all of our ice makers undergo as part of the manufacturing process.
• Please follow the initial preparation and cleaning instructions as detailed in the User Guide prior to using your new icemaker.
• When using, please avoid direct sunlight.

Installation Checklist

• Leveling
  • Cabinet is setting solid on all corners
• Electrical Power
  • House power turned on
• Ice Maker
  • Ice maker is turned ON
• Final Checks
  • Shipping material removed

IMPORTANT SAFETY INFORMATION

WARNING Please read all instructions before using this appliance.

• Safety Definitions This is the safety alert symbol. It is used to alert of potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
• DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
• WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
• IMPORTANT indicates installation, oper-ation or maintenance information which is important but not hazard-related.

Child Safety

• Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the Ice Maker is unpacked. Children should NEVER use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.

Safety Instructions

• DO NOT store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards.
• Avoid contact with any moving parts of automatic ice maker.
• Remove all staples from the carton. Staples can cause severe cuts, and also destroy finishes if they come in contact with other appliances or furniture.

SAFETY INSTRUCTIONS

This appliance must be plugged into at least a 15 AMP 110-115 VOLT 60 Hz GROUNDED OUTLET. This appliance must be grounded. It is equipped with a 3-wire cord having a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. WARNING! Improper use of grounded wire can result in the risk of electric shock. Consult a physician if necessary. Do not attempt to defeat this safety feature by modifying the plug. Avoid the use of an extension cord because it may overheat and cause a risk of fire. However, if it is necessary to use an extension cord:

• A. Use only 3-wire extension cords with 3-blade grounding plug.
• B. The marked rating of an extension cord must be be equal to or greater than the rating of this appliance.
• C. It should be positioned such that it does not drape over the counter or tabletop where it can be pulled on by children intentionally.

Attempting any maintenance or cleaning: To minimize the possibility of electric shock, unplug this appliance from the power suply or disconnect at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning. NOTE: Pressing the Power Ice/Clean button to an off position does not disconnect the appliance from the power supply. Warning:** **IMPORTANT NOTICE: Use Only Water** We want to ensure the safe and efficient operation of your ice maker. Please be aware that this appliance is designed for one specific purpose – to make ice from water. Do not use any beverages, liquids, or substances other than water in this ice maker. Using anything other than water may lead to damage, malfunctions, and potentially hazardous situations therefore voiding your warranty. **Why Use Only Water:**

1. **Safety:** Introducing beverages or non-water substances can result in chemical reactions or build-up that could pose safety risks.
2. **Performance:** Using water ensures that your ice maker functions as intended, producing clean and odorless ice cubes.
3. **Durability:** Water is the only liquid that will not corrode or damage the internal components of your ice maker, preserving its lifespan.

**Consequences of Using Beverages:**

• **Damage:** Non-water substances can corrode, clog, or damage the internal components, resulting in costly repairs or replacement.
• **Health Concerns:** Using beverages may introduce contaminants into the ice-making process, potentially impacting the safety of the ice produced.
• **Voided Warranty:** Using beverages or non-water substances may void your appliance’s warranty, leaving you responsible for any repair or replacement costs.
• To ensure the longevity and reliability of your ice maker, always follow these guidelines strictly. Only use clean, potable water in your ice maker to guarantee safe and refreshing ice for all your beverage needs.
• If you have any questions or concerns regarding the proper usage of your ice maker, please refer to the user manual or contact our customer support for assistance.

GETTING TO KNOW YOUR UNIT

1. Control panel
2. Drawer water tank: drawer for water
3. Drawer ice basket: drawer for ice
4. Drip tray
5. Unit shell
6. Tip-up door: After opening this door, you can directly clean the internal water tank
7. Rear Panel
8. Hot air outlet
9. Power cord
10. Cover: cover for drawer water tank
11. Ice scoop
12. Lid: you can open the lid and pour the water into the tank

Come equipped with a premium stainless steel ice scoop, allowing for easy and hygienic handling of ice.

OPERATING PROCEDURES & MAINTENANCE

UNPACKING YOUR ICE MAKER

1. Remove the exterior and interior packaging, and then check all the accessories are included. If any parts are missing, please contact our customer service.
2. Remove all the tapes on the unit; take out the accessory parts inside.
3. Clean the interior with lukewarm water and a soft cloth.
4. Locating your ice maker on a level counter table far from direct sunlight and other sources of heat (i.e.: stove, furnace, and radiator). Make sure that there is at least 6 inches between the back and sides of your ice maker with the wall.
5. Allow one hour for the refrigerant fluid to settle down before plugging your ice maker in.
6. The power plug must be accessible directly.
   • WARNING: Fill with drinking water (potable water) only.

CONNECTING YOUR ICE MAKER

DANGER *Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged please call our customer service.

1. This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a grounding plug which mates with standard grounding wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounding wall outlet. Do not be under any circumstances; damage the grounding means of the plug. Any questions concerning power and or grounding should be directed toward a certified electrician.
3. This appliance requires a standard 110-120Volt, 60Hz electrical outlet with good grounding means.

CLEANING AND MAINTAINING YOUR ICE MAKER Before using your ice maker, it is strongly recommended to clean it thoroughly. Unplug the unit before cleaning or making any maintenance.

1. Take out the drawer water tank and drawer ice basket.
2. Clean the interior with commercial descaling solution specifically designed for ice makers, warm water and a soft cloth. First pour the warm water with diluted descaling solution into the internal water reservoir, and then use the soft cloth to wipe the surface.
3. Again use the water to rinse the inside parts, and drain out the water by unplugging the drain cap on the back.
4. The outside of the ice maker should be cleaned regularly with a mild commercial descaling solution specifically designed for ice makers and warm water.
5. Dry the interior and exterior with a soft cloth.
6. When the appliance is not in use for a long time, open water drain cap to drain out water completely from water reservoir.

USING YOUR ICE MAKER

How to start the unit

1. Pull out the drawer water tank, Open the lid of the drawer water tank, pour potable water into drawer water tank, until the drawer water tank is filled with water, then push it back to the original place.
2. Before you put back the drawer ice basket, please make sure the water tank under the drawer ice basket is empty，if is not, unplug water drain plug to drain out water completely.
3. Put the drip tray in position
   • Operation and display areas
4. Plug in the power cord, the power indicator is on: you can operate this appliance by touch the button on panel as shown above, the main function includes: ice and clean
   • Clean For the first time, or the clean procedure has not been running for a long time, it is highly recommended to run this procedure at first.
5. Before clean procedure, please fill the drawer tank with water and check the drainpipe under the appliance, make sure the water drain cap has been inserted into the unit; otherwise the appliance will not work properly.
6. Press“CLEAN”button “”, the icon lights up, it will run cleaning procedure for at least 20 minutes, then the icon goes out. Press this button again, it will stop cleaning.
7. After cleaning procedure, move the appliance to the edge of the desktop, make sure that the appliance is placed steady, place a water container under the appliance, remove drain plug from the bottom, water in the tank under the drawer and the evaporator will drain into the water container, then reinsert the plug.
   • Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level. If the unit isn’t to be used, drain all water & dry the water reservoir.
   • How to obtain the ice-cube
8. Before we start making ice,first please fill the drawer water tank with water and check the drainpipe behind the appliance, make sure the water drain cap has been inserted into the drainpipe; otherwise the ppliance will not work properly.
9. Press the “ICE” button ““, the icon lights up, it begin to work, Press this button again, it will stop making ice.
10. For the first time, or if the appliance has not been used for a long time, it is recommended to clean this appliance before you start to make ice.
11. While the ice-maker is on, verify water level periodically. If water pump can’t pump out water, the ice maker will stop automatically, and the “Add water” indicator will on. Need to pour water into the drawer water tank, then press the “ICE” button twice to restart ice-making. When Ice Full indicator is on
12. The ice maker automatically stops working when the ice-cube is full inside and the “ ice full” Indicator is on. Open the Drawer Ice Basket
13. Hold the drawer handle gently and pull it out along the horizontal direction, until the back of the drawer contacts the front panel and then gently put it down, the drawer will have a certain angle hanging in the front panel. Instead, when you need to close the drawer, hold the drawer handle and place the drawer horizontally, then gently push it into full closure.Take Out the Drawer Ice Basket
14. Hold the drawer handle gently and pull it out along the horizontal direction, until the back of the drawer contacts the front panel and then gently put it down, the drawer will have a certain angle hanging in the front panel. Instead, when you need to close the drawer, hold the drawer handle and place the drawer horizontally, then gently push it into full closure.Open the Drawer Water Tank and Add Water
15. Hold the handle of the drawer and gently pull it out in a horizontal direction until the bottom of the drawer hooks the mouth frame and then gently lower it. At this time, you can open the lid of the water filler and start adding water. Conversely, when it needs to be closed, hold the drawer handle and gently push it in until it is fully closed. Take Out the Drawer Water Tank
16. Pull the water tank outward in a horizontal direction, and when the panel frame is about to be pulled out, hold the water tank with the other hand to prevent it from falling. When placing the water tank back, first use your hands to support the tank and align it with the panel frame, then push it horizontally. Note that the water tank must be completely pushed to the bottom, otherwise the waterway may not be connected.Open the Cover for Drawer Water Tank
17. Take Out the Drawer Water Tank, Open the cover from the lid of the water tank cover, and then open the cover upward.Clean the Internal Water Tank
18. Open the flip cover at the top: Pull back he flip cover parallelly for a distance first, then rotate to open it, use a small brush to clean the internal water tank.

System Cleaning/Sanitizing Procedure
To clean internal parts of nugget ice maker, please complete the following steps:

1. Unplug the nugget ice maker.
2. Remove the drain pipe and drain the water into the sink. See the fiqure below.
3. Create a solution of five cups of water and one teaspoon of household bleach for daily cleaning.
   • For monthly cleaning to remove mineral deposits , please use the 100% white vinegar instead of the above water solution (and then plug in to turn on “cleaning function” about 5 minutes, after that unplug again to leave the white vinegar in the unit more than 12 hours).
4. Pour solution into water reservoir (up to 1.8L). See the figure below.
5. Plug in the Nugget ice maker, press the “Clean” button to initiate the cleaning process(20 minutes). See the figure below.
6. When the cleaning is completed and the indicator light if off, remove the drain cap and drain the water into the sink.
7. Repeat the step 4 to 6 with fresh water for two more cycles to rinse the inside.
8. Reset the drain cap after drainage. See the figure below.
9. When finished, add potable water to the water tank, press the “ICE” button to start ice making. See the figure below.

TROUBLESHOOTING GUIDE

PROBLEM	POSSIBLE CAUSES	SOLUTION
“Add Water” indicator lights up	Lack of Water.	Stop the ice maker, fill water, and press “Ice/ Clean” button again to restart the unit.
	Internal water tank baffle is not installed in place.	Reinstall the internal water tank baffle in place.
	Water pump failure.	Verify by a qualified technician.
“Ice Full” indicator lights up	There are too much ice cubes.	Suggest you to obtain the ice-cube.
	(No ice cube inside).	Remove the probable obstacle inside or clean the inside wall of the ice storage.
		Press “Ice” button for 5 seconds, it will work for 80 minutes.
Power and ICE icon flashing	Ambient temperature or water temperature in inner tank is too high.	Please run the ice maker below 90 Fahrenheit degree ambient and pour colder water into tank.
	Refrigerant liquid leakage.	Press the “Ice” button to press the “Ice” button again to restart ice making program, if this problem show up again, verify by a qualified technician.
	Cover motor is broken.
	The pipe in the cooling system is blocked.
Making Ice too slowly	Hot Air outlet has been blocked by something.	Hot Air outlet must be guaranteed to have more than 15 CM of ventilation.
	The water temperature in inner tank is too high.	Water temperature requirement between 44.6°F -89.6°F.
	Refrigeration system malfunctions.	Verify by a qualified technician.
Water leakage	The drain plug is not in place.	Put the drain plug in place.
	Pipe joints in the appliance may loose.	Verify by a qualified technician.
	The seal has reached service life.	Verify by a qualified technician.

Noise and water shortage lights

Need to clean.

More frequent squeaking usually requires white vinegar cleaning to remove internal mineral scale buildup. Fill the reservoir with vinegar to the max fill line and run up to three cleaning cycles. If using vinegar, leave the vinegar in the unit for 18 hours and set a vinegar-soaked towel on the ice chute overnight to further dissolve any mineral buildup. Clean the sensors with vinegar and wipe clean with water. After draining the vinegar, run three rinse cycles, using fresh water for each rinse.

PRODUCT SPECIFICATIONS

• Model Variants: EFIC220-BLACK-6COM, EFIC220-GREY-6COM, EFIC220-NAVY-6COM
• Type: Ice Maker
• Country of Manufacture: USA, Canada
• Power Requirement: 15 AMP, 110-115 VOLT, 60 Hz GROUNDED OUTLET
• Input Voltage: 115V 60Hz
• Ice-Making Capacity: 33lbs/24H
• Out of Box Weight (lbs.): 23.4
• In Box Weight (lbs.): 26.5
• Box Dimensions (in.): 10.9X18.9X16.8
• Power Cord Length (in.): 70.9
• Unit Width (in.): 9.4
• Unit Depth (in.): 13.8
• Unit Height (in.): 14.8
• Amperage of power required when unit is running: 2.7 A
• Wattage of power required when unit is running: 192 W

LIMITED WARRANTY

T o make a warranty claim, please email support2@curtiscs.com or call 1-800-968-9853.
1 Year warranty

• This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original delivery to the consumer. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.
• This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).
• We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.

For faster service, locate the model, type, and serial numbers on your appliance.

ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you contact the Support Team:

• Name, address and telephone number.
• Model number and serial number.
• A clear, detailed description of the problem.
• Proof of purchase including dealer or retailer name, address and date of purchase.

CONTACT INFORMATION

Canada

• CURTIS INTERNATIONAL LTD
• 7045 BECKETT DRIVE, UNIT 15
• MISSISSAUGA, ONTARIO
• L5S 2A3
• For service assistance and product information, please call: 1-800-968-9853.
• Curtis International Ltd. 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3 www.curtisint.com.

FAQs

• Q: Can children use the ice maker?
  • A: Children should not use the ice maker unsupervised, and they should never play with the packaging materials.
• Q: What should I do if any parts are missing upon unpacking?
  • A: Please contact our customer service immediately for assistance in case of missing parts.
• Q: Can I modify the plug of the appliance?
  • A: Do not attempt to modify the plug as it can pose a risk of electric shock. Consult a professional if needed.

Documents / Resources

FRIGIDAIRE EFIC220-BLACK-6COM Touchscreen Nugget Ice Maker [pdf] Instruction Manual EFIC220-BLACK-6COM, EFIC220-GREY-6COM, EFIC220-NAVY-6COM, EFIC220-BLACK-6COM Touchscreen Nugget Ice Maker, EFIC220-BLACK-6COM, Touchscreen Nugget Ice Maker, Nugget Ice Maker, Ice Maker

References

• User Manual