K688T USER’S GUIDE
SS Version:24-V1
WARRANTY
Every Fifine product comes with a Limited Warranty that in normal use of product will be free of any defects in material or workmanship for a period of one year from its original date of purchase. For detailed warranty info, please refer to the warranty policy on our website, or contact us directly.
CERTIFICATION
Eligible to bear CE Marking.
Authorized European Representative:
Name: AOCE INFORMATION TECHNOLOGY
Address: 61 rue de Lyon 75012 Paris France
Tel: +33-633297410
Authorized British Representative:
Name: AOCE LIMITED
Address: Office Suite 29a 3/F 23 Wharf Street, London, England, SE8 3GG
Tel: +44-759 7659 775
WHAT’S IN THE BOX
1 X Microphone with Shock Mount
1 X Boom Arm Stand
1 X C-Clamp
1 X 8.2ft (2.5m) USB Cable
1 X 5/8″ Male to 3/8″ Female Adapter
1 X User’s Manual
PRODUCT DESCRIPTION
- Dynamic Microphone Capsule
- Detachable Windscreen
- Mute Button and LED Indicator
- Shock Mount
- XLR Port
- Type-C Port
- Headphone Jack
- Headphones Volume Knob
- Microphone Gain Knob
- 8.2ft (2.5m) USB Cable
- Screw Adapter
- Boom Arm Stand
- C-Clamp
Tips: No XLR cable is included
GUIDELINE FOR USE
Installation and Use
Install the C-clamp and boom arm stand on desk. Screw the mic to the arm stand, until they are firmly connected.
Always keep the TOP of the mic facing the audio source, It is suggested that record in the range of 2 to 6 in.
XLR Port Connection
Connect the microphone to mixer or audio interface via the XLR cable (NOT INCLUDED). No preamp or phantom power are needed.
Tips: All the function keys and headphones monitoring on the mic are only available when using USB-C port connection, but invalid when using XLR port connection.
FUNCTION KEY INSTRUCTION
Microphone Gain and Headphone Volume Knob
COMPUTER SET-UP (MAC OS & WINDOWS)
APPLE MAC OS (Only Applicable for USB Connection)
Input Settings
Output Settings
Output the audio from internal speakers
Output the audio from headphones
Output the audio from mic
WINDOWS (Only Applicable for USB Connection)
Input Settings
Output Settings
Output the audio from built-in speaker
Output the audio from headphones
Output the audio from mic
Tips:
- “Speaker Properties”-“Level”-Make sure turn on the “speaker icon” under “Microphone” before monitoring the mic.
- Manually select the “Speaker (Realtek High Definition Audio)” as the default playback device, if you want to output computer audio via the computer built-in speaker.
- There is no XLR cable included.
- When the microphone is connected to computer, mic input volume is only adjusted by gain knob on the mic, but can not be adjusted by computer setting.
- Select “fifine Microphone” as the input device from the setting when using recording software.
SPECIFICATION
| Model Number: K688T | Frequency Range: 50Hz-16KHz |
| Element: Dynamic | S/N Ratio: >80dB |
| Polar Pattern: Cardioid | Sensitivity: -50+3dB |
| Connector: USB-C and XLR | Power Supply: 5+0.25V |
Documents / Resources
 |
fifine K688T Recording Microphone with Dyanmic Capsule [pdf] User Guide K688T, K688T Recording Microphone with Dyanmic Capsule, Recording Microphone with Dyanmic Capsule, Microphone with Dyanmic Capsule, Dyanmic Capsule |