QUICK START GUIDE
F75 MAX
75% Gasket-mounted Hot Swappable 2.4Ghz/Bluetooth 5.0/Wired RGB Mechanical Keyboard with TFT screen and a Knob
Should you require more assistance please email us at support@epomaker.com.
F75 MAX Swappable 2.4Ghz/Bluetooth 5.0/Wired RGB Mechanical Keyboard
WINDOWS | MAC oS | |
F 1 | F 1 | Screen Brighiness – |
F 2 | F 2 | Screen Brightness + |
F3 | F3 | Toggle betwaen task: |
F4 | F4 | Desktop |
F5 | F5 | Keyboard Backlight – |
F6 | F6 | Keyboard Backight + |
F7 | F7 | Previous Track |
F8 | F8 | Play/Pause |
F9 | F9 | Next Track |
F10 | F10 | Mute |
F11 | F11 | Volume – |
F12 | F12 | Volume + |
FN+F1 | Browser | F 1 |
FN+F2 | F 2 | |
FN+F3 | Toggle between tasks | F3 |
FN+F4 | Explorer | F4 |
FN+F5 | Keyboard Backiight – | F5 |
FN+F6 | Keyboard Backight + | F6 |
FN+F7 | Previous Track | F7 |
FN+F8 | Play/Pause | F8 |
FN+F9 | Next Track | F9 |
FN+F10 | Mute | F10 |
FN+F11 | Volume – | F11 |
FN+F12 | Volume + | F12 |
FUNCTION KEY COMBINATIONS
FN+EsC (HOLD 35) |
Reset the Keyboard to the Factory Setting | FN+˜ | Holdfor3stoPair24G Connectivity |
FN+DEL | Ins | FN+1! | HoldforstoPair Buletooth Device1 |
FN+END | Home, | FN+2@ | Hold for 3s to Pair Bluetooth Device 2 |
FN+U | prise | FN+3# | HodforSstopar Blustooth Device 3 |
FN+l | scr | FN+WIN | Lok Windows key |
FN+O | Pause | FN+KNOB | Toggle control between Screen and Volume |
LIGHT EFFECTS
FN+↑ | Backlights Brightness + |
FN+↓ | Backiights Brightness – |
FN+→ | Backignts Speed- |
FN+→ | Backights Speed + |
FN+|\ | Toggle Backlight effect |
FN+TAB | Toggle Backight Colour |
SCREEN CONTROL
SYSTEM | Win/Mac/i0S/Android |
EFFECT | Toggle the Backight RGB |
‘COLOUR | Toggle the Backlight colour |
BRIGHTNESS | Backight Brightness +/- |
SPEED | Backight Speed +/- |
‘VOLUME | Control the Volume +/- |
LANGUAGE | Toggle the screen language (Chinese or English) |
PAIRING WIRELSS 2.4G
- Toggle the switch to 24G side, press and hold the F + ~ for 3 seconds until the screen shows “2.4G Pairing” and the ight indicator fiashes quickly
- Insert the 2.4Ghz dongle to your device.
- When the screen shows “2.4G Success!” and the green light indicator stop flashing, the keyboard is connected to the device.
PAIRING BLUETOOTH
- Toggle the switch to BT side, press and hold Fn+ 11/ 26/ 3# for 3 seconds until the screen ‘shows “BT1/2/3 Pairing” and the green light indicator under 1/2/3 flashes quickly.
- Tum on your Bluetooth device and find
* AULA F75 Max-1/ AULA F75 Max-2/ AULAF75 Max-3″,then connect. - When the screen shows “BT1/2/3 Success!” and the green fight indicator stop flashing, the keyboard is connected to the Bluetooth device.
* Short press Fri+ 1/ 20/ 34 to toggle between Bluetooth device 1/2/3
WIRED MODE
Toggle the switch to the Wired (middle) and then plug in the USB-C cable, then the keyboard is connected.
* The battery charges under either wireless or wired mode, as long as the keyboard is plugged.
BATTERY-SAVING MODE
The keyboard willgo nto deep sieep after 5 minutes of no key pressing. Backight willbe off.
Press any key to wake up the keyboard and connect back o Gonnectiviy.
LIGHT INDICATOR: (ALSO SHOWS ON THE SCREEN)
Windows key: Windows key stays at white light when the windows key is locked Caps key: The indicator stays at white when the caps lockis on Scroll key: The indicator 1lights up when the scrol lock is on
SPECS
Brand: | EPOMAKER x AULA |
Model: | F75 Max |
Key Amounts: | 80 Keys + 1 knob |
Screen: | 0.85-inch TFT Screen |
Software: | AULA Driver |
Mounting Type: | Gasket |
Stabilizer Type: | Plate-mounted |
Case Material: | ABS Plastic |
Plate Material: | PC Flex-cuts |
PCB Type: | 3/5-pin Hotswap PCB |
Connectivity: | Type-C Wired, Bluetooth, 2.4G |
Anti-Ghost Key: | NKRO in all modes |
Polling Rate: | 1000hz in USB & 2.4G mode; 125hz in Bluetooth mode |
Battery Capacity: | 4000mAh |
Backlight: | RGB, South-facing LEDs |
OS Compatibility: | Windows/Mac/Android/iOS |
Battery Lasting: | ≥30.5 hrs (with RGB on) /≥80 hrs (with RGB off) |
Dimension: | 327.69 (L)×143.17(W)×43.26(H)±0.5mm |
Weight | Net 960g |
REPLACING KEYCAPS AND SWITCHES
For afull guide on how to remove keycaps and switches scan the GR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-o-remove-and-replace-your-mechanical-keyboard-switches
Before installing switches, be sure the pins are clean and straight
Push Straight Down
Please be gentle. Be sure the pins are aligned with the slots.
Included Tools
Remove Switches
- Grab your Switch Removal Tool and align the gripping toath vertically (on the Y-Auxs)at the center of the swich, 2 shown in the example graphic above.
- Grab the switch with the Switch Puler and apply pressure unti the swich releases isel from the lat.
- Using firm but gentleforce pullthe switch away from the.
Keyboard using a vertcal motion
Install Switches
- Check that al he switch metalc pins are perfectly traight and clean
- Align the switch vertically to have the Gateron logo facing north. The pins should align hemselves o the keyboard PBC.
- Press the switch down unt you hear a cick. This means your switch cips have attached themssives to the keybosrd pate.
- Inspect the svitch toensure s properly attached to your keyboard, andtestit,
Note:If the key doesntwork ts possible you may have bent one of the switches whilenstalling . Pul the switch out and repeat the process.
Pin may be damaged beyond repair and ned roplacement fprocess is ot done correctly. Never apply excessive force when replacing e or switchs. I you cannol remove o Install Koyeaps or SwHanes ploas Gontact cUSIomor Service a6 soon a3 poSSII 10 AVold kedamag to the keyboard due to operating erors
TECHNICAL ASSISTANCE
For technical assistance, please email to support@epomaker.com with your purchase order number and detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any. aditional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
https://discord.gg/2q327C2
https://www.reddit.com/r/Epomakerkeyboard/
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase.
It doesn’tcover any damage that may occur from normal wear and tear.
If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought from our website (EPOMAKERcom). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing _internal components, Assembling and reassembiing the product, Replacing Bateries, etc.
We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller o likewise. Please contact the store that you bought your product from to resolve issues.
Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road, Xili Street, Nanshan Disctrict, Shenzhen, Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com
APEX CE SPECIALISTS GMBH
Habichtweg 141468 Neuss Germany
Contact: Wells Yan E-mail: info@apex-ce.com
APEX CE SPECIALISTS LIMITED
89 Princess Street, Mancheste, M1 4HT. UK
Contact: Wells Yan E-mail: info@apex-ce.com
Points de collecte sur www.quefairedemesdechets.fr
WARNING
Choking Hazard Small Parts Keep away from children and pets
Documents / Resources
![]() |
EPOMAKER F75 MAX Swappable 2.4Ghz/Bluetooth 5.0/Wired RGB Mechanical Keyboard [pdf] User Guide F75 MAX Swappable 2.4Ghz Bluetooth 5.0 Wired RGB Mechanical Keyboard, F75 MAX, Swappable 2.4Ghz Bluetooth 5.0 Wired RGB Mechanical Keyboard, 2.4Ghz Bluetooth 5.0 Wired RGB Mechanical Keyboard, 5.0 Wired RGB Mechanical Keyboard, RGB Mechanical Keyboard, Mechanical Keyboard, Keyboard |