MODELS
SS-075Q / SS-075CQ / SS-075C-PEQ
- Large button has “Emergency” printed on face*
- NO or NC (selectable) momentary contact†
- Contact rated 0.5A@12VDC (1.0A@12VDC for SS-075C-PEQ)
- Screw terminals
- Off-white
Parts List
1x Button
1x Manual
SS-075C-PEQ includes 3 labels “Emergency”, “Push to Exit”, and
“Presione Para Salir,”
†SS-075Q is N.O. (push-to-close) momentary contact only
Specifications
Installation
Please read this manual carefully before you begin the installation.
- Find the appropriate location to mount the button.
- Run 2 wires to the mounting location from the device you want to control.
- Connect the 2 wires to the back of the button.
- To either the NO/COM or NC/COM for the SS-075CQ or SS-075C-PEQ
- To the NO/COM for the SS-075Q
- Mount the button.
Overview
California Proposition 65 Warning: These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1) year from the date of sale to the original
customer.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice.
SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2024 SECO-LARM U.S.A., Inc.
All rights reserved.
CONTACT
SECO-LARM ® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com
Phone: 949-261-2999 | 800-662-0800 Email: sales@seco-larm.com
® PITSW1
Order Part# 763-045-1%
MI_SS-075xxxx_240105_ML.docx
Documents / Resources
 |
ENFORCER SS-075Q Emergency Push To Exit Buttons [pdf] Owner's Manual SS-075Q, SS-075CQ, SS-075C-PEQ, SS-075Q Emergency Push To Exit Buttons, SS-075Q, Emergency Push To Exit Buttons, Push To Exit Buttons, Exit Buttons, Buttons |
