ELD Plug and Play Corridor Function Sensor Pack
INSTRUCTION MANUAL
Plug & Play Corridor Function Sensor Pack
VT-CF: Corridor Function Pack For Vala & Toro Ranges.
Specifications:
- Product Name: Plug & Play Corridor Function Sensor Pack
- Model: VT-CF
- Compatibility: Vala & Toro Ranges
- Features: Corridor Function, LED Lamp, CCT Switch
Product Usage Instructions:
Step 1: Unplug
1. Locate the Terminal Block with the following connections:
- T1: Mains Input
- D1: Driver Input
- D2: Driver Output
- L1: LED Array Input
Unplug any existing connections.
Step 2: Plug In
2. Find the Corridor Function Sensor with connections:
- T1: Mains Input
- M1: MW Sensor Input
- M2: MW Sensor Output
- L1: LED Array Input
- D1: Driver Input
- D2: Driver Output
Plug in the sensor pack into the corresponding gear tray.
Step 3: Configuration
3. Configure the CCT switch and PWM settings as needed for your setup.
Step 4: Finalize
4. Clip the sensor pack securely onto the gear tray to ensure proper function.
Frequently Asked Questions (FAQ):
Q: How do I know if the sensor pack is properly installed?
A: Ensure all connections are secure and the sensor pack is clipped onto the gear tray without any loose parts.
Q: Can the CCT switch be adjusted after installation?
A: Yes, the CCT switch can be adjusted to change the color temperature output of the LED lamp.
Documents / Resources
 |
ELD Plug and Play Corridor Function Sensor Pack [pdf] Instruction Manual 6Ft - 31W, 40W, 48W, 57W, Plug and Play Corridor Function Sensor Pack, Corridor Function Sensor Pack, Function Sensor Pack, Sensor Pack, Pack |
