ELD Plug and Play Corridor Function Sensor Pack Instruction Manual

ELD Plug and Play Corridor Function Sensor Pack

INSTRUCTION MANUAL

Plug & Play Corridor Function Sensor Pack

VT-CF: Corridor Function Pack For Vala & Toro Ranges.

Specifications:

• Product Name: Plug & Play Corridor Function Sensor Pack
• Model: VT-CF
• Compatibility: Vala & Toro Ranges
• Features: Corridor Function, LED Lamp, CCT Switch

Product Usage Instructions:

Step 1: Unplug

1. Locate the Terminal Block with the following connections:

• T1: Mains Input
• D1: Driver Input
• D2: Driver Output
• L1: LED Array Input

Unplug any existing connections.

Step 2: Plug In

2. Find the Corridor Function Sensor with connections:

• T1: Mains Input
• M1: MW Sensor Input
• M2: MW Sensor Output
• L1: LED Array Input
• D1: Driver Input
• D2: Driver Output

Plug in the sensor pack into the corresponding gear tray.

Step 3: Configuration

3. Configure the CCT switch and PWM settings as needed for your setup.

Step 4: Finalize

4. Clip the sensor pack securely onto the gear tray to ensure proper function.

Frequently Asked Questions (FAQ):

Q: How do I know if the sensor pack is properly installed?

A: Ensure all connections are secure and the sensor pack is clipped onto the gear tray without any loose parts.

Q: Can the CCT switch be adjusted after installation?

A: Yes, the CCT switch can be adjusted to change the color temperature output of the LED lamp.