ECHTPOWER SP02 Wireless Controller
PRODUCT OVERVIEW
How to Connecting
How to Connect YS46 Controller with Switch/PC/IOS/Android?
Switch
Wireless connection: press pairing button for 2 seconds, led 1-led4 lights flash quickly.
Wired connection:
Android
- Press and hold the “X+Home” button for 2 seconds in the off state, then it is in Android gamepad mode, and the led4 light will be on.
- After the first pairing is successful, the next time you press the HOME button, it will automatically connect.
macoS
On MFI mode,press”B+Home”button for 2 seconds, led3 indicator will be on.
USB
- PC: only support USB-C cable connection.
After the computer is connected, it can also charge the controller at the same time.There are 2 modes: Xinput and Dinput, the default is Xinput mode, you can long press “+” and “-” to switch each other.
- #1 Xinput mode: led 1 and led4 light will be on.
- #2 Dinput mode: led2 and led3 light will be on.
How to Set Turbo Function
- Manual Turbo: Press (the first time)A/B/X/Y/L/ZL/R/ZR/+turbo button to set continuous firing function.
- Clear the continuous sending: press turbo again (the second time) to realize the auto turbo function; Press and hold turbo button for 5 seconds to clear all consecutive functions.
- Press and hold turbo button + A button to clear current turbo function of A button.
Battery
- State of charge Indicator Status
- Low power Channel lights flash in the game
- Charging Led 4 indicator flashing
- Charging complete → Led 4 indicator is always on
Automatic shutdown
- If the Host screen is closed, the controller automatically sleep.
- After pairing is successful, controller will automatically shut down if no operation for 5min.
- In wireless mode, press the “Home” 3s to disconnect the host, then controller will sleep.
How to Set Led Lights?
- Turbo button + L3 click: monochromatic always bright Change order: red, orange,yellow,green, cyan, blue, purple, pink, (phantom). cyclic transformation.
- Turbo button + L3 double click (first time): Colorful breathing The overall lighting color changes automatically according to red, orange, yellow, green, cyan, blue, purple and pink.
- Turbo button + L3 double-click (second time): Symphony breathing mode.
- Turbo button + L3 double-click (the third time): turn off the light.
- Press and hold (Turbo button + L3) at the same time: adjust the brightness in 4 levels. 25%, 50%, 75%, 100%.
- Turbo button + R3: A,B,X, Y decorative lights A (yellow) B (blue) X (green) Y (red) There are 3 modes: always on, breathing and off. By pressing the Turbo button+ R3 at the same time, it can be switched cyclically, with a memory function.
- Support Keylinker APP, support APP to change buttons, adjust motor intensity, adjust RGB lighting and other functions.
How to Set Back Button Function?
- Single button setting:Dpress and hold MR (setting button) +A (lick); 2after the vibration prompt, the setting is successful; 3 the XR button is set to A. Macro button setting:*press and hold MR (setting button) + continuous action; Zafter the vibration prompt, the setting is successful; 3 set the XR button as macro.
- Single button setting:(1)press and hold ML(setting button) + A (click); (2)after the vibration prompt, the setting is successful; (3)Set XL button to A.
Macro button setting: Dpress and hold ML (setting button) + continuous action; Dafter the vibration prompt, the setting is successful; 3)set the XL button as macro.
How to adjust the Vibration Intensity
- Increases Vibration Intensity
- Decreases Vibration Intensity
Email:info@Amz-lab.de
Email: GSG–GROUP@outlook.com
Manufacturer: Shenzhen Mike Morgen Technology Co.,Ltd.
Address: 609 Mike Morgen Building D,Bantian International Center,Longgang District, Shenzhen
Model: SP02
Documents / Resources
![]() |
ECHTPOWER SP02 Wireless Controller [pdf] User Manual NS, LITE, OLED, SP02 Wireless Controller, SP02, Wireless Controller, Controller |