EchtPower Wireless Controller User Manual
For NS/Lite/OLED
Product Information
Brand: EchtPower
Model: SP02
FCC ID: 2A88F-SJ01R
Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd.
Address: 609 Mike Morgen Building D, Bantian International Center, Longgang District, Shenzhen
UK REP: AMZLAB GmbH, Laubenhof 23, 45326 Essen, Email: info@Amz-lab.de, Telephone: +491745298066
UK Business Name: GSG CONSULTING GROUP LIMITED, Unit 3 Matthew street Gorton Manchester, Email: GSG-GROUP@outlook.com, Tel: 07927 638013
Certifications: CE, RoHS
Controller Layout
Left Stick (L3): Left analog stick.
Screenshot: Button for taking screenshots.
Home: Home button.
Direction Key (D-Pad): Up, Down, Left, Right directional buttons.
+ Button: Plus button.
- Button: Minus button.
Increases Vibration: Button to increase vibration intensity.
XR: Programmable back button.
MR: Programmable back button.
R: Right trigger.
R1: Right bumper.
Turbo: Turbo function button.
RESET: Reset button.
ML: Programmable back button.
L: Left trigger.
L1: Left bumper.
ZL: Left trigger button.
ZR: Right trigger button.
Pairing Key: Button for wireless pairing.
Y, X, A, B: Face buttons.
Right Stick (R3): Right analog stick.
Decreases Vibration: Button to decrease vibration intensity.
XL: Programmable back button.
Connection Methods
Switch
Wireless: Press the Pairing button for 2 seconds. LED1-LED4 lights will flash quickly. Navigate to 'Settings > Controllers and Sensors > Change Grip/Order' on the Switch.
Wired: Connect via USB cable to the Switch console.
Android
Wireless: In off state, press and hold 'X + Home' for 2 seconds. LED4 will light up. Subsequent connections can be made by pressing the Home button.
macOS
MFI Mode: Press and hold 'B + Home' for 2 seconds. LED3 will light up.
PC
Wired: Connect via USB-C cable. Supports Xinput (LED1+LED4 on) and Dinput (LED2+LED3 on) modes. Switch modes by long-pressing '+' and '-' buttons for 3 seconds.
Turbo Function
Manual Turbo: Press a button (A/B/X/Y/L/ZL/R/ZR) + Turbo button to set continuous firing.
Auto Turbo: Press the same button combination again to enable auto turbo hold.
Clear Turbo: Press and hold the Turbo button for 5 seconds to clear all turbo functions. Press and hold Turbo + A to clear the turbo function for button A.
Battery Status
- Low Power: Game channel lights flash.
- Charging: LED4 indicator flashes.
- Charging Complete: LED4 indicator is always on.
Automatic Shutdown
- Controller sleeps when the Host screen is closed.
- Controller sleeps after 5 minutes of inactivity.
- Press and hold the Home button for 3 seconds in wireless mode to disconnect and put the controller to sleep.
LED Light Settings
- Monochromatic Always On: Press Turbo + L3 (click once). Cycle through colors: Red, Orange, Yellow, Green, Cyan, Blue, Purple, Pink, Phantom (cyclic transformation).
- Colorful Breathing: Press Turbo + L3 (double-click first time). Colors change automatically.
- Symphony Breathing: Press Turbo + L3 (double-click second time).
- Turn Off Light: Press Turbo + L3 (double-click third time).
- Brightness Adjustment: Press and hold Turbo + L3. Adjust brightness in 4 levels (25%, 50%, 75%, 100%).
- ABXY Decorative Lights: Press Turbo + R3. Cycle through modes: Always On, Breathing, Off. A (Yellow), B (Blue), X (Green), Y (Red).
Keylinker APP: Supports Keylinker APP for button customization, motor intensity adjustment, and RGB lighting control.
Back Button Function
Single Button Setting:
- Press and hold MR (setting button) + desired button (e.g., A).
- Controller vibrates to confirm setting.
- Press XR to activate the assigned function.
Macro Button Setting:
- Press and hold MR (setting button) + a sequence of actions.
- Controller vibrates to confirm setting.
- Press XR to activate the macro function.
For XL button: Repeat the above steps using ML and XL.
Clear Back Button Function: Press and hold XL/XR for a period to clear saved back button functions.
Vibration Intensity Adjustment
Increase Vibration: Press the 'Increases Vibration' button.
Decrease Vibration: Press the 'Decreases Vibration' button.
