EATON Tripp Lite Series USB-C Memory Card Reader
Installation Instructions
USB-C Memory Card Reader
Product Overview
The USB-C Memory Card Reader is designed for use with laptops or PCs. It supports various types of memory cards including SD, CF, and Micro SD cards.
Supported Connections
- USB-C (USB 3.2 Gen 1)
Supported Devices
- Laptop or PC
Supported Card Types
- SD Card
- CF Card
- Micro SD Card
Specifications
| Manufacturer | Eaton |
|---|---|
| Address | 1000 Eaton Boulevard, Cleveland, OH 44122, United States |
| Website | Eaton.com |
| Publication No. | 24-07-159 / 93-4B8E RevA |
| Publication Date | December 2024 |
Trademark Information
Eaton is a registered trademark. All trademarks are property of their respective owners.
Policy Note
Eaton has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.
Eaton
- 1000 Eaton Boulevard
- Cleveland, OH 44122
- United States
- Eaton.com
© 2024 Eaton
All Rights Reserved
Publication No.
24-07-159 /
93-4B8E_RevA
December 2024
Frequently Asked Questions
- Q: Can I use this device with a Mac computer?
A: Yes, as long as your Mac has a USB-C port, you can use this device with it. - Q: What is the maximum capacity supported for SD cards?
A: The U452-003 supports SD cards up to 256GB in capacity. - Q: Is this device compatible with Windows and Linux operating systems?
A: Yes, the U452-003 is compatible with Windows and Linux operating systems with USB-C support.
Documents / Resources
 |
EATON Tripp Lite Series USB-C Memory Card Reader [pdf] Installation Guide U452-003, Tripp Lite Series USB-C Memory Card Reader, Tripp Lite Series, Tripp Lite Series Memory Card Reader, USB-C Memory Card Reader, Memory Card Reader, USB-C Card Reader, Card Reader |
