dynamic BIOSENSORS AS-2-Ra v5.1 Adapter Strand
Product Information
Specifications:
- Product Name: heliX+ ADAPTER STRAND 2 with red dye Ra
- Manufacturer: Dynamic Biosensors GmbH & Inc.
- Order Number: AS-2-Ra
- Key Features: 2 spots with 2 different anchor sequences for DNA-encoded addressing
Product Description:
This product contains Adapter strand 2 – Ra with a concentration of 400 nM. It is for research use only and has a limited shelf life. Please see the expiry date on the label. To avoid multiple freeze-thaw cycles, it is recommended to aliquot the nanolever.
Preparation
- Mix Adapter strand 1 – Ra (400 nM) and conjugated Ligand strand with ligand 1 (500 nM) at a 1:1 ratio (v/v).
- Mix Adapter strand 2 – Ra (400 nM) and conjugated Ligand strand with ligand 2 (500 nM) at a 1:1 ratio (v/v).
- Incubate separately the two solutions from steps 1 and 2 at room temperature at 600 rpm for 30 minutes to ensure complete hybridization.
- Mix the solutions from steps 1 and 2 at a 1:1 ratio (v/v). The solution is now ready to use for biochip functionalization.
The stability of the solution is dependent on the stability of the ligand molecules.
FAQ:
- Q: Can I use this product for clinical purposes?
A: No, this product is for research use only. - Q: How should I store the product?
A: Store as per the storage information provided on the label. Avoid multiple freeze-thaw cycles. www.dynamic-biosensors.com
Key Features
- Adapter strand 2 for functionalization of heliX® Adapter Chip Spot 2.
- Compatible with heliX® Adapter Chip.
- Includes Adapter strands for 50 regenerations.
- Ideal for MIX&RUN sample preparation.
- Adapter strand 2 carries a moderately hydrophilic red dye (Ra) with a single positive net charge.
heliX® Adapter Chip Overview
2 spots with 2 different anchor sequences for DNA-encoded addressing.
Product Description
Order Number: AS-2-Ra
Table 1. Contents and Storage Information
| Material | Cap | Concentration | Amount | Buffer | Storage |
| Adapter strand 2 – Ra | White | 400 nM | 5 x 100 µL | TE40 [1] | -20°C |
For research use only.
This product has a limited shelf life, please see expiry date on label.
To avoid many freeze thaw cycles please aliquot the nanolever.
Preparation | MIX&RUN
In-solution hybridization of adapter and ligand strands:
- Mix Adapter strand 1 – Ra (400 nM) and conjugated Ligand strand with ligand 1 (500 nM) at 1:1 ratio (v/v).
- Mix Adapter strand 2 – Ra (400 nM) and conjugated Ligand strand with ligand 2 (500 nM) at 1:1 ratio (v/v).
- Incubate separately the two solutions of step 1 and 2 at RT at 600 rpm for 30 min to ensure complete hybridization.
- Mix solution of step 1 and 2 at 1:1 ratio (v/v).
Solution is ready to use for biochip functionalization.
Stability of the solution is related to the stability of the ligand molecules.
Table 2. Additional material for functionalization of spot 1 and reference spot 2.
| Material | Concentration | Buffer | Related Product Name | Order No |
| Adapter strand 1 – Ra | 400 nM | TE40 [1] | Adapter strand 1 with red dye Ra | AS-1-Ra |
| Ligand strand carrying the conjugated ligand 1 | 500 nM | P2] E40 [ | heliX® Amine Coupling Kit 1 | HK-NHS-1 |
| Ligand strand carrying the conjugated ligand 2 | 500 nM | PE40 [2] | heliX® Amine Coupling Kit 1 | HK-NHS-1 |
Example
Required volume for 3 functionalizations: 100 μL with a final concentration of 100 nM.
| Vial 1 | Vial 2 | ||
| Adapter strand 1 – Ra (400 nM) | Conjugated Ligand strand with ligand 1 (500 nM) | Adapter strand 2 – Ra (400 nM) | Conjugated Ligand strand + with ligand 2 (500 nM) |
| 25 µL | 25 µL | 25 µL | 25 µL |
After incubation time, mix vial 1 and vial 2 to obtain 100 μL of ready-to-use DNA solution.
Contact
Dynamic Biosensors GmbH
Perchtinger Str. 8/10
81379 Munich
Germany
Dynamic Biosensors, Inc.
300 Trade Center, Suite 1400
Woburn, MA 01801
USA
Order Information order@dynamic-biosensors.com
Technical Support support@dynamic-biosensors.com
www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
TE40: 10 mM Tris, 40 mM NaCl, 0.05 % Tween20, 50 μM EDTA, 50 μM EGTA
If the protein is not stable in PE40 (TE40, HE40), please check buffer compatibility with the switchSENSE® compatibility sheet.
www.dynamic-biosensors.com
Documents / Resources
 |
dynamic BIOSENSORS AS-2-Ra v5.1 Adapter Strand [pdf] User Manual AS-2-Ra v5.1, AS-2-Ra v5.1 Adapter Strand, Adapter Strand, Strand |
