DIGITALas Di-K2F TTLock Smart Touch Coded Keypad
Smart Access Controller K2/K2F
- Model: K2/K2F
- Dimensions: W79mm x H125mm x T15.5mm
- Material: Aluminum frame/Tempered glass panel
- Communication: Bluetooth 4.1
- Supporting systems: Android 4.3/IOS7.0 above
- Stand-by current: ≈5mA
- Operating current: ≈1A
- Power supply: 12V
- Unlocking time: ≈1.5S
- Waterproof level: IP66
- Card capacity: 20,000 Cards
Accessories
Illustration
Drill a hole for the cable
- Drill a hole at appropriate position to make space for the cable to connect to the power source.
Install the mounting plate
- Fix the mounting plate with 4 screws.
Wiring
Connect the cable of the access controller to power cable and other ports according to the illustration.
Install the hook
- Fix the hook to the mounting plate with 2 screws.
Install the access controller
- Fit the access controller into the hook and fix it on the mounting plate with a screw in the bottom.
Pair the access controller with app
- Tap the panel to light it up and activate the lock.
- On voice prompt“ Please add Bluetooth Administrator”, activate the APP.
- Tap the“ 三” icon on the upper left corner, tap“ +Add Lock”, select“ Door Lock”.
- Tap the device shown on the screen. Wait a few seconds till the lock gives a voice prompt/long beap, which means it is added successfully.
Notice: If fails, please shut off the APP and Bluetooth，turn them on and try the above process again.
Limited Warranty
- For any defect in material and workmanship, the original purchaser of the product
- Can return or ask for a replacement within 7 invoice days.
- Can ask for a replacement within 15 invoice days.
- Can ask for free repair in 365 invoice days.
- This warranty does not cover defects caused by modification, alteration, misuse or physical abuse of the product.
Documents / Resources
 |
DIGITALas Di-K2F TTLock Smart Touch Coded Keypad [pdf] User Manual Di-K2F TTLock Smart Touch Coded Keypad, Di-K2F, TTLock Smart Touch Coded Keypad, Smart Touch Coded Keypad, Touch Coded Keypad, Coded Keypad |
