Digchip HF102F Miniature High Power Relay Owner’s Manual

Digchip HF102F Miniature High Power Relay Owner's Manual.jpg

 

FIG 1.JPG

 

Features

  • 4.5kV dielectric strength (between coil and contacts)
  • Heavy load up to 5000VA
  • Ideal for motor switching
  • PCB & QC layouts available
  • UL insulation system: Class F

 

CONTACT DATA

FIG 2 CONTACT DATA.JPG

 

COIL

FIG 3 COIL.JPG

 

COIL DATA

at 23ºC

FIG 4 COIL DATA.JPG

Notes:

1 )The data shown above are initial values.
2)*Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time.

 

CHARACTERISTICS

FIG 5 CHARACTERISTICS.JPG

Notes: The data shown above are initial values.

 

SAFETY APPROVAL RATINGS

FIG 6 SAFETY APPROVAL RATINGS.JPG

 

Notes:

1) All values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications can be available upon request.

FIG 7.JPG

 

ORDERING INFORMATION

FIG 8 ORDERING INFORMATION.JPG

 

Notes:

  1. HF102F is dust protected version which cannot be washed.
  2. The customer special requirement express as special code after evaluating by Hongfa.
  3. Two packing methods available: plastic tray package, tube package,Standard tube packing length is 596mm. Any special requirement needed, please contact us for more details.
  4. For products that should meet the explosion-proof requirements of “IEC 60079 series” ,please note (Ex) after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products.

 

OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT

Outline Dimensions
Unit: mm

FIG 9 Outline Dimensions.JPG

 

FIG 10 Outline Dimensions.JPG

 

Remark:

  1. In case of no tolerance shown in outline dimension: outline dimension tolerance should be +0.2mm; outline dimension and SS5mm, tolerance should be *0.3mm; outline dimension tolerance should be *0.4mm.
  2. The tolerance without indicating for PCB layout is always +0.1 mm.

 

CHARACTERISTIC CURVES

FIG 11 CHARACTERISTIC CURVES.JPG

 

Disclaimer
The specification is for reference only. See to “Terminology and Guidelines” for more information. Specifications subject to change without notice.
We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only.

Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved.

 

Read More About This Manual & Download PDF:

Documents / Resources

Digchip HF102F Miniature High Power Relay [pdf] Owner's Manual
HF102F Miniature High Power Relay, HF102F, Miniature High Power Relay, High Power Relay, Power Relay

References

Leave a comment

Your email address will not be published. Required fields are marked *