Danfoss VISGL90N Link CC Central Controller
Specifications:
- Product: Danfoss LinkTM CC Central Controller
- Manufacturer: Danfoss Heating Solutions
- Model Number: VISGL90N
- Release Date: 05/2015
Product Usage Instructions:
1. Installation:
Follow these steps for the installation of the Danfoss LinkTM CC
Central Controller:
- Start by installing and registering all mains-powered devices
on the panel. - Proceed with the installation process as outlined in the
manual.
2. Connection to Wi-Fi and Application:
To connect to Wi-Fi and the application, follow these steps:
- Connect to a Wi-Fi network.
- Pair the panel with the application.
- Edit paired devices as needed.
3. Software Update:
For updating the software, refer to the manual for detailed
instructions.
4. Disposal Instructions:
Properly dispose of the product following the provided
instructions in the manual.
FAQ:
Q: How do I add devices to the system?
A: Refer to section 4.1 of the manual for guidance on adding
devices to the Danfoss LinkTM CC system.
Q: How do I perform a network test?
A: Section 4.9 provides detailed instructions on conducting a
network test for the system.
Documents / Resources
 |
Danfoss VISGL90N Link CC Central Controller [pdf] Installation Guide VISGL90N Link CC Central Controller, VISGL90N, Link CC Central Controller, Central Controller |
 |
Danfoss VISGL90N Link CC Central Controller [pdf] Installation Guide AQ164286471139sv-SE0801, VISGL90N, VISGL90N Link CC Central Controller, Link CC Central Controller, Central Controller, Controller |
