Danfoss R1270 Oil Separator
Oil Separator
Type OUB
Refrigerants
R22, R1270*, R134a, R290*, R404A, R407A, R407C, R407F, R438A, R448A, R449A, R450A, R452A, R507A, R513A, R600*, R600a*
For a complete list of approved refrigerants, visit www.products.danfoss.com and search for individual code numbers, where refrigerants are listed as part of technical data.
* OUB 1 only
Specifications
| Temperature Range | -40 – 120 °C (248 °F) |
|---|---|
| Brazing Temperature | Max. 150 °C (300 °F), Max. 700 °C (1300 °F) |
| Brazing Material | 15% Ag |
| Components | KP15, OUB, SGI |
| Recommended Tightening Torque of Unions | OUB 1: 40 Nm, OUB 4: 90 Nm |
| Max. Working Pressure | PS/MWP = 28 bar/406 psig |
Product Usage Instructions
- Ensure the product is compatible with one of the listed refrigerants.
- Refer to the installation guide for specific steps on installing the oil separator.
- When tightening unions, use the recommended torque values for OUB 1 and OUB 4.
- Do not exceed the maximum working pressure of 28 bar / 406 psig to prevent damage.
FAQ
- Q: Can I use a refrigerant not listed in the manual?
A: It is recommended to only use refrigerants listed in the manual for optimal performance and safety. - Q: What happens if I exceed the recommended tightening torque?
A: Exceeding the recommended torque may lead to leaks or damage to the oil separator components. - Q: How do I check for leaks in the oil separator?
A: Inspect the unions and connections for any signs of leakage or oil residue regularly.
Documents / Resources
 |
Danfoss R1270 Oil Separator [pdf] Installation Guide OUB 040R9573, OUB SGI, KP15, R1270 Oil Separator, R1270, Oil Separator, Separator |
