Danfoss EV310A Solenoid Valve GMS Instruments
Specifications
- Type: 3-way direct-operated solenoid valve.
- Flow Direction: Diverting or mixing based on configuration.
- Body Material: Brass or stainless steel (model-dependent).
- Seal Material: EPDM, FKM, or NBR, depending on application requirements.
- Operating Pressure: Handles low to medium pressure ranges.
- Connection Sizes: Typically G 1/8″, G 1/4″, or similar, depending on the model.
- Temperature Range: Varies by seal material but generally supports a wide range for industrial use.
- Voltage Options: Multiple coil voltage options, such as 24V DC, 230V AC, etc.
Installation Instruction
© Danfoss | Climate Solutions | 2022.12
FAQs
- What is the primary use of the Danfoss EV310A?
It is typically used for diverting or mixing fluid flows in heating, cooling, and industrial systems. - Can it handle corrosive fluids?
Yes, but the material (stainless steel or brass) and seal type must be chosen based on fluid compatibility. - Is it easy to install?
Yes, the compact design and standardized connections make it straightforward to install. - How do I select the right model?
Consider factors like fluid type, pressure, temperature, and connection size. GMS Instruments can assist in selecting the correct configuration. - What maintenance is required?
Routine cleaning and inspection of the valve body and seals are recommended to ensure longevity.
Documents / Resources
 |
Danfoss EV310A Solenoid Valve GMS Instruments [pdf] Installation Guide EV310A Solenoid Valve GMS Instruments, EV310A, Solenoid Valve GMS Instruments, Valve GMS Instruments, GMS Instruments, Instruments |
 |
Danfoss EV310A Solenoid Valve [pdf] Installation Guide 520B1034, 089, EV310A Solenoid Valve, EV310A, Solenoid Valve, Valve |
