Danfoss-logo

Danfoss AHQM AC Driver and Controls

Danfoss-AHQM-AC-Driver-and -Controls-PRODUCT

Product Specifications

  • Model: AHQM
  • DN (Nominal Diameter): 15-32
  • Compatible Models: AMV(E) 10, AMV(E) 13, AMV(E) 130(H)/140(H)
  • Pressure Rating: 0.5 bar
  • Manufacturer: Danfoss Heating

Product Usage Instructions

AHQM, DN 15-32

Danfoss-AHQM-AC-Driver-and -Controls-FIG- (1)

Installation Guide:

  1. Ensure the AHQM valve is compatible with the specific model you are using (AMV(E) 10, AMV(E) 13, AMV(E) 130(H)/140(H)).
  2. Follow the provided installation guide for DN 15-32 to correctly install the valve in your system.

Valve Sizing:
Refer to the following table for the appropriate DN size and kvs value based on your system requirements:

DN Size kvs Value
15 1.0
20 2.5
25 4.0
32 6.3

Danfoss-AHQM-AC-Driver-and -Controls-FIG- (2) Danfoss-AHQM-AC-Driver-and -Controls-FIG- (3) Danfoss-AHQM-AC-Driver-and -Controls-FIG- (4) Danfoss-AHQM-AC-Driver-and -Controls-FIG- (5) Danfoss-AHQM-AC-Driver-and -Controls-FIG- (6)

Dimensions and Weight:
Refer to the provided table for the dimensions and weight specifications of the AHQM valve for different DN sizes.

Danfoss-AHQM-AC-Driver-and -Controls-FIG- (7) Danfoss-AHQM-AC-Driver-and -Controls-FIG- (8)

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order, provided that such alterations can be made without subsequent changes being necessary in specifications already agreed. All trademarks in this material are the property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

FAQ

Q: Can the AHQM valve be used with models other than AMV(E) 10, AMV(E) 13, and AMV(E) 130(H)/140(H)?
A: The AHQM valve is specifically designed for use with the mentioned models. For other models, please refer to the manufacturer’s recommendations.

Q: What is the maximum pressure rating for the AHQM valve?
A: The maximum pressure rating for the AHQM valve is 0.5 bar.

Q: How do I determine the correct DN size for my system?
A: Refer to the valve sizing table provided in the user manual based on your system requirements to select the appropriate DN size.

Documents / Resources

Danfoss AHQM AC Driver and Controls [pdf] Installation Guide
AMV E 10, AMV E 13, AMV E 130 H -140 H, AHQM AC Driver and Controls, AHQM, AC Driver and Controls, Driver and Controls, Controls

References

Leave a comment

Your email address will not be published. Required fields are marked *