Danfoss 088N2108 01 Icon Master Controller
Product Information
Specifications
- Product Name: Zigbee Module for Danfoss IconTM Master Controller
- Model Number: AN32293719605201-010202 / 088N2108 01
- Compatibility: Designed for use with Danfoss IconTM Master Controller
- Network Protocol: Zigbee 3.0
Product Usage Instructions
Installation
To install the Zigbee Module for Danfoss IconTM Master Controller, follow these steps:
- Choose a suitable location for placement.
- Follow the installation instructions provided in the manual corresponding to your language.
Including Module to Zigbee Network
To include the module in your Zigbee network, follow these steps:
- Refer to the specific instructions provided in the manual for detailed guidance.
- Ensure that the Zigbee Module is within range of your Zigbee network.
LED Blinking Patterns
Observe the LED blinking patterns to understand the status of the Zigbee Module.
Lost Connection to Zigbee Network:
If you experience a lost connection, refer to the manual for troubleshooting steps specific to your language.
Updating the Master Controller Firmware:
To update the firmware of the Master Controller, follow these steps:
- Refer to the Danfoss IconTM 24V Master Controller installation manual for detailed instructions.
- Do not disconnect the device during the update process.
Frequently Asked Questions (FAQ)
Q: Does the IconTM Master Controller support the Zigbee module?
A: No, the IconTM Master Controller does not support the Zigbee module as indicated in the manual.
Placement
Installation
Ready for inclusion
Icon™ Master Controller does not support Zigbee module
Including module to Zigbee network
<Zigbee 3.0
Zigbee 3.0
Ping Test – from Zigbee module
LED Blinking patterns
Identify – from App
Lost connection to Zigbee network 
Updating the Master Controller firmware 
- Update in progress – Do not disconnect while updating.
- Please refer to Danfoss Icon™ 24V Master Controller installation guide for more information.
Factory reset Zigbee module
UK Product Security and Telecommunications Infrastructure (UK PSTI) statement
For the product covered by this instruction, including relevant software, Danfoss declares that, to the best of our knowledge, the product and related software complies with the requirements stated in the UK PSTI Act and Regulation, provided that the product is used in accordance with our instructions.
- No universal default passwords.
- The security update period for this product is Invoice date + 2 years.
- If a security vulnerability is identified with the product, this can be reported by following this link: https://www.danfoss.com/en/service-and-support/report-security-vulnerability/
If you report a security vulnerability you will receive an acknowledgment of the receipt of the security issue reported and the option for status updates until the resolution of the reported security issue.
Simplified EU Declaration of Conformity
Hereby, Danfoss A/S declares that the radio equipment type Zigbee Module is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
EU DECLARATION OF CONFORMITY
- Danfoss A/S Climate Solutions
- danfoss.com
- +45 7488 2222
Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
Documents / Resources
 |
Danfoss 088N2108 01 Icon Master Controller [pdf] Installation Guide AN32293719605201-010202, 088N2108 01, 088N2108 01 Icon Master Controller, 088N2108 01, Icon Master Controller, Master Controller, Controller |
