Dahua Technology IPC-HFW2649S-S-IL Bullet IP Security Camera

Specifications

Model	1.2.51.32.23710-000

Package Contents

• Bullet Network Camera x1
• Mounting Base x1
• Screws x2
• Optional Accessories x1

Installation Steps

Step 1: Camera Preparation

1. Use a PH1 screwdriver to tighten the screws with a torque of 0.6 N·m.

Step 2: Mounting the Camera

1. Drill holes in the wall using a 6 mm drill bit.
2. Insert wall anchors.
3. Attach the mounting base using a PH2 screwdriver with a torque of 0.8 N·m.
4. Secure the camera to the mounting base.
5. Adjust the camera angle as needed.
6. Ensure all connections are secure.

Step 3: Optional Connections

Option A: Cable Connection

1. Connect the cables as shown.
2. Ensure the connectors are securely fastened.
3. Use waterproof tape to protect the connection.

Option B: Additional Setup

1. Connect additional components as needed.
2. Ensure all connections are weatherproofed.

FAQ

1. What tools do I need for installation?
   You will need a PH1 and PH2 screwdriver, a drill with a 6 mm bit, and waterproof tape.
2. Can I adjust the camera angle after installation?
   Yes, you can adjust the camera angle using a PH2 screwdriver.
3. How do I ensure the connections are waterproof?
   Use waterproof tape to cover all exposed connections.

Documents / Resources

Dahua Technology IPC-HFW2649S-S-IL Bullet IP Security Camera [pdf] Installation Guide IPC-HFW2649S-S-IL Bullet IP Security Camera, IPC-HFW2649S-S-IL, Bullet IP Security Camera, IP Security Camera, Security Camera

References

• User Manual