CTA PAD-LOCVB Digital Full Rotation Desk Mount

Contents

Installation

1. Install Enclosure to VESA. Screw in provided nails and nuts as illustrated (Shown Above)
2. Insert appropriate foam pieces that is compatible to your tablet (Shown Above)
3. Insert Tablet as shown. Plug in power cable to tablet and cable route through the back (Shown Above)
   
4. Place the appropriate provided  tablet cover to match your tablet (Shown Above)
5. Close the enclose and lock to complete setup (Shown Above)

Mounting Installation

Mounting to solid concrete or block desk (Shown Above)

Mounting to stud desk (Shown Above)

36 Taaffe Place Brooklyn, NY 11205
support@ctadigital.com
778-991-0169
www.ctadigital.com

Documents / Resources

CTA PAD-LOCVB Digital Full Rotation Desk Mount [pdf] Installation Guide PAD-LOCVB, PAD-LOCVB Digital Full Rotation Desk Mount, Digital Full Rotation Desk Mount, Full Rotation Desk Mount, Desk Mount

References

• User Manual