CONDUCTIX wampfler 0811 Conductor Rail System Single FlexLine User Guide
NOTICE
The animations do not replace the Installation Instruction. Please refer also to our Technical Documentation („BAL0811-0001“ und „MV0811-0018“)!
SingleFlexLine 0811 Conductor Rail System
Please click the hyperlink or scan the code to start each animation:
System Overview SingleFlexLine 0811: MOV0811-0001
Cutting Rail and Producing Notch for Connector: MOV0811-0002
Bending Rail: MOV0811-0003
Mounting Hanger Clamps (clip-in, screwable and turnable): MOV0811-0004
Mounting End Cap Bars: MOV0811-0005
Connecting Rails and Mounting Line Feed: MOV0811-0006
Mounting and Adjusting Expansion Unit: MOV0811-0007
Mounting Anchor Points with pins (081133): MOV0811-0008
Drilling Jig for Anchor Point with Pin: MOV0811-0014
Mounting Screwable Anchor Points (081131/081132): MOV0811-0009
Current Collector Tolerances: MOV0811-0010
Mounting the Air Gap Insulation Section: MOV0811-0011
Mounting Towing Bracket: MOV0811-0012
Mounting the Outrigger: MV0811-0013
Conductix-Wampfler GmbH
Rheinstraße 27 + 33
79576 Weil am Rhein – Märkt
Germany
Phone: +49 (0) 7621 662-0
Fax: +49 (0) 7621 662-144
info.de@conductix.com
www.conductix.com
Importer for the United Kingdom:
Conductix-Wampfler Ltd.
1, Michigan Avenue
Salford
M50 2GY
United Kingdom
Phone: +44 161 8480161
Fax: +44 161 8737017
info.uk@conductix.com
www.conductix.com
Documents / Resources
 |
CONDUCTIX wampfler 0811 Conductor Rail System Single FlexLine [pdf] User Guide 0811 Conductor Rail System Single FlexLine, 0811, Conductor Rail System Single FlexLine, Conductor Rail System, Rail System |
