cardo PACKTALK SKI Snowboard and Ski Helmet Speaker and Intercom Sound Installation Guide

CONTENTS

MOUNTING WITH A GLUE PLATE

1. Press small coin into opening of cradle, release clip
   
2. 
3. Clean the area with the alcohol pad
   
4. Press for 60 seconds
   
5. Slide the back plate into position on the glue plate
   

MOUNTING WITH A CLAMP

• Push the metal clip between the helmet’s outer shell and inner padding
  
  

POSITION THE MICROPHONE

Bend the microphone

PLACING THE SPEAKERS A

Plug in the speakers

1. 
2. Push back the inner padding
   
3. Push the speakers through the inner padding
   
4. Attach the Velcro Pads to the helmet’s inner padding
   
5. 

PLACING THE SPEAKERS B

• Place the speakers inside the inner padding
• Push back the inner padding
  
  
  

INSERTING THE UNIT

REMOVING THE UNIT

REMOVING THE GLUE

 

Documents / Resources

cardo PACKTALK SKI Snowboard and Ski Helmet Speaker and Intercom Sound [pdf] Installation Guide PACKTALK SKI, Snowboard and Ski Helmet Speaker and Intercom Sound

References

• User Manual