WIFI02-GF Smart Socket Plug
“
Product Information
Specifications:
- Input voltage: 230Vac/50Hz
- Load power: 16A Max. 3680W
- WIFI parameters: Supports protocol 802.11 b/g/n; passageway
1-14@2.4GHz - Support WPA/WPA2 security
- Power Consumption: 0.5W
- System supports: iOS 8.0 and above versions; Android 4.4 and
above mobile phones
Product Usage Instructions
1. Using the APP for Control and Operation:
Download and install the designated mobile application on your
iOS or Android device.
Follow the setup instructions provided in the app to connect the
unit to your home WIFI network.
You can now control and operate the unit remotely through the
app on your mobile device.
2. Using the Gear Switch for Time Setting:
Locate the gear switch on the unit for time control.
Adjust the gear switch to set the desired time settings for the
unit’s operation.
Frequently Asked Questions (FAQ)
Q: How do I download the APP for this product?
A: To download the APP, scan the QR code provided in the user
manual or search for the app in your device’s app store.
“`
SMART WIFI WIFI02-GF User Manual
Product Features 1. Using APP to control and operate the unit. 2. Using the gear switch to control and setting the time.
Operation WIFI02 is a single output Smart WIFI timer socket. Use mobile software to control the on/off and countdown of the socket through WIFI connection. 1. Before using the device, you need to configure the network to connect the product to the Internet via WIFI, which can be either a router or a hot spot on a mobile phone. When the product is powered on, the display flashes OFF, long press the red button for 3S for connecting till the display shows “00.00” and stop to flash which means successful. If no need to distribution network, can press the red button or rotate the gear switch to be in “00.00” standby mode directly.
SMART WIFI WIFI02-GF User Manual
2. Two mode of red button: short press and long press. – In standby mode, short press to be ON, the socket is outputting continuously. Press again to stop the outputting. – Long press is to enter the status of the EZ distribution network. When the OFF is flashing, it can be connected according to the EZ configuration method; and exit the previously connected mobile phone signal; 3. There is a gear switch around the product casing. It has two mode of clockwise and counterclockwise. – In standby mode, rotating clockwise by 1 grid will increase the countdown timer by 15 minutes and display 00.15. Rotated clockwise continuously, the maximum display will be 24.00. – Conversely, rotate counterclockwise by 1 grid to reduce the countdown timer by 15 minutes, and rotate counterclockwise continuously until the minimum display is 00.00.
Specification: Product model: WIFI02 Product size: 67 × 67 × 84MM Color: WHITE Product weight: 95g
SMART WIFI WIFI02-GF User Manual
Input voltage: 230Vac/50Hz Load power: 16A Max. 3680W WIFI parameters: Supports protocol 802.11 b/g/n;
passageway 1-14@2.4GHz Support WPA/WPA2 security Power Consumption: 0.5W System supports: iOS 8.0 and above versions;
Android 4.4 and above mobile phones
APP Step To scanning the QR code as below for download the APP.
Documents / Resources
 |
BSEED WIFI02-GF Smart Socket Plug [pdf] User Manual WIFI02-GF Smart Socket Plug, WIFI02-GF, Smart Socket Plug, Socket Plug, Plug |