bouncepad CD-B4-TA9P-MX Counter Tablet Security Enclosure
Product Information
Specifications
- Product Name: Counter
- Sheet Code: BP-IM-037_REV3
Frequently Asked Questions
- Q: What tools are required for assembly?
- A: You will need a Socket Driver and a T20 Pin Torx Driver Bit.
- Q: Can I use electric tools to tighten the screws?
- A: No, using electric tools may damage your Bouncepad. Please tighten the screws using hand tools only.
- Q: How do I record the key number for future reference?
- A: We recommend recording the key number provided in the Pair of Keys so that you can purchase additional keys in the future if needed.
Tools Required:
- Socket Driver
In the Box
Fixings List
Fixings List
‘Mounting Arm Box’ includes:
‘Freestanding Base Box’ includes:
- * Due to the modular nature of our product range you may receive additional fixings in the fixings kit
Installation Instructions
- Locate & secure the Flex Mounting Arm to the Freestanding Base.
- Attach the Bouncepad Case to its Mounting Arm. Take care to ensure correct & full thread engagement.
- Unlock & remove the Faceplate from the Bouncepad Case.
- Install the Tablet Setup Kit. Each kit is specific per tablet device and Bouncepad Case.
- Feed the tablet cable through the Bouncepad Case & mounting arm.
- Place the tablet into the Case and connect to power.
- Locate and lock the Faceplate onto the Bouncepad Case.
- We recommend recording the key number so you can purchase additional keys in the future.
- Installation is now complete.
Copyright 2016 Spotspot Ltd. (T/A Bouncepad) all rights reserved.
Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder.
Documents / Resources
 |
bouncepad CD-B4-TA9P-MX Counter Tablet Security Enclosure [pdf] Instruction Manual CD-B4-TA9P-MX Counter Tablet Security Enclosure, CD-B4-TA9P-MX, Counter Tablet Security Enclosure, Tablet Security Enclosure, Security Enclosure, Enclosure |