BITMAIN S19 XP Hyd Crypto Miner

Specifications

Model	S19 XP+ Hyd.
Sub	252T, 266T, 279T, 293T
Power Supply	Phase: 3
Input Voltage	380~415 Volt
Input Frequency Range	50~60 Hz
Input Max Current	12 Amp
Network Connection Mode	RJ45 Ethernet 10/100M
Server Size (w/o package)	339*173*207 mm
Server Size (with package)	570*316*430 mm
Net Weight	12.3 kg
Gross Weight	13.6 kg

Product Usage Instructions

Power Supply and Network Connection
The S19 XP+ Hyd. requires a three-phase power supply with an input voltage of 380~415 Volt and an input frequency range of 50~60 Hz. Connect the server to the network using the RJ45 Ethernet port.

Coolant Requirements
The server operates with a coolant flow of 8.0~10.0 L/min and a coolant pressure of 3.5 bar. Use antifreeze, pure water, or deionized water with the specified pH values and diameter of coolant pipe connector (OD10).

Operating Environment
The server should be operated within a temperature range of -20~70°C and a humidity level of 10~90% RH (non-condensing).

FAQ

• What are the typical hashrates for the S19 XP+ Hyd.?
  The typical hashrates for the S19 XP+ Hyd. models are as follows: 252T – 252 TH/s, 266T – 266 TH/s, 279T – 279 TH/s, and 293T – 293 TH/s.
• How should I choose the appropriate coolant for the server?
  You can use antifreeze with a pH value of 7.0~9.0, pure water with a pH value of 6.5~7.5, or deionized water with a pH value of 8.5~9.5 for the server’s coolant system.

S19 XP+ Hyd.
Product Manual

Jul. 2024
BITMAIN TECHNOLOGIES INC.
www.bitmain.com

Specification

Product Glance	Value
Model	S19 XP+ Hyd.
Sub	252T	266T	279T	293T
Version	10
Crypto algorithm/coins	SHA256|BTC/BCH/BSV
Typical hashrate, TH/s(1-1)	252	266	279	293
Power on wall @35℃(1-2), Watt(1-1)	4788	5054	5301	5450
Power efficiency on wall@35℃(1-2), J/T(1-1)	19
Detailed Characteristics	Value
Power Supply
Phase	3
Input voltage, Volt(2-1)	380~415
Input frequency range, Hz	50~60
Input max current, Amp	12
Hardware Configuration
Network connection mode	RJ45 Ethernet 10/100M
Server size (length*width*height, w/o package), mm	339*173*207
Server size (length*width*height, with package), mm	570*316*430
Net weight, kg	12.3
Gross weight, kg	13.6
Environment Requirements
Inlet coolant temperature, °C	20~50
Coolant flow, L/min	8.0~10.0
Coolant pressure, bar	≤3.5
Working coolant(2-2)	Antifreeze/ Pure water/Deionized water
Coolant pH value	Antifreeze: 7.0~9.0 Prue water: 6.5~7.5 Deionized water：8.5~9.5
Diameter of coolant pipe connector, mm	OD10
Storage temperature, °C	-20~70
Operation humidity(non-condensing), RH	10~90%

Notes:

1. The hashrate value, power on wall, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual power on wall and power efficiency on wall fluctuate by ±5%.
2. Inlet coolant temperature.
   1. Caution: Wrong input voltage may cause server damaged.
   2. For detailed working coolant use and maintenance instructions, please refer to “ANTSPACE HK3 Water Cooling Container & Dry-Wet Tower Product Manual”, Chapter 9, Article 3, Point 6, “Maintenance of Coolant”!

Performance Curves

1. Hashrate vs. Inlet Coolant Temperature
2. Power Efficiency vs. Inlet Coolant Temperature
3. The hashrate value, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual power efficiency on wall fluctuate by ±5%.

Documents / Resources

BITMAIN S19 XP Hyd Crypto Miner [pdf] User Guide S19 XP Hyd Crypto Miner, S19 XP Hyd, Crypto Miner, Miner

References

• User Manual