BenQ RD320U, RD320UA LCD Monitor

Specifications:

• Product Name: LCD Monitor
• Model No.: RD320U, RD320UA

Disassembly Tools

Tool	picture
Philips Screwdriver for M3 Screw
Nosed Pliers
Diagonal Cutting Pliers
Slotted screwdriver
Six Point Sockets
Philips Screwdriver for M2.5 Screw
Knife

Product exploded view

Table 1 Disassembly parts list 

Item	Description	Item	Description
1	DECO	16	POWER_BOARD
2	DECO_SPONGE	17	MAIN FRAME
3	BI_LENS	18	SAFETY MAYLAR
4	PANEL	19	LED RING HOLDER
5	SAFETY MYLAR	20	RING_FPC
6	TOUCH_KEY_COVER	21	DRIVER_BOARD
7	TOUCH_KEY_PCB	22	REAR_COVER
8	BI_HOLDER	23	LIGHT LENS
9	PXY_PCB	24	VESA COVER
10	TOUCH KEY HOLDER	25	STAND /VESA ASSY
11	MIDDLE_FRAME	26	BASE ASSY
12	OSD_KEY	27	SPEAKER
13	NAVI_KEY	28	Connector
14	OSD_KEY_PCB	29
15	SCALER_BOARD	30

Table 2 Screw 

Item	Description	Qty	Unit
S1	Screw D3X7 Pan W/C Nickel	8	PCS
S2	Screw-M4	1	PCS
S3	Screw-M3X6	8	PCS
S4	Screw-M2X3	6	PCS
S5	Screw M3X4 Flat Nickel	17	PCS
S6	Screw M4X10 Flat Nylok Black Zinc	8	PCS
S7	Screw Q3X6 Pan Nickel	16	PCS
S8	Screw M3X6 Flat CR3 Black Zinc	2	PCS
S9	Screw Q3X8 Pan CR3 Black Zinc	2	PCS
S10	Screw M4X8 Flat W/W Nickel	1	PCS
S11	Screw-M3X6	2	PCS

External cable

External cable
Item	Description	Qty	Unit
P1	Power cable	1	PCS
P2	USB-C cable	1	PCS
P3	HDMI cable	1	PCS
P4	USB 3.2 Gen1 cable	1	PCS

Product Disassembly

Place the monitor face down on a smooth surface first.

1. Detach the monitor stand and base.
   • Release the thumbscrew on the bottom of the monitor base and detach the base.
   • Push the button to remove the stand assy.
2. Remove the back cover.
   • Release the screws first and use the tool (not provided) starting from the top of monitor to open all the latches of the back cover slowly and carefully.
3. Remove Vesa plate and LED control board
   • Release the screws first, disconnect the cables and remove Vesa Plate, LED control board from panel. Note: DO NOT need to remove LED board which is adhesive to Vesa Plate.
4. Remove main frame and speaker from the panel.
   • Tear out tapes and mylar.
   • Disconnect all the cables
   • Release the screws.
   • Lift up the main frame and disconnect the cable.
   • Remove speakers.
5. Release screws to take out middle frame and bezel.
6. Separate the board from the main frame.
   • Turn over the main frame and release all the screws to separate boards from main frame.
7. Take out the boards from middle frame with releasing the screws.
   • Take out sensor cover, release the screws to detach sensor board from middle frame.
   • Release screw, take out touch key lens first and detach touch board assembly from middle frame.
8. Detach key board from middle frame
   • Release screws first, and detach touch key holder from middle frame.
   • Release screws and take out key board.

Recycle characteristics

Recycle characteristics Part	No.
Reuse	–
Recycle	1,2,3,5,6,7,8,10,11,12,13,17,18,19,20,22,23,24,25,26,27,28S1,S2,S3,S4,S5,S6,S7,S8,S9,S10,S11
WEEE annex VII	4,9,14,15,16,21, P1~P4
Recovery	–
Disposal	–

Disassembly Time

Total time: 30 minutes

FAQ:

• Q: Can I recycle this product on my own?
  A: No, in order to reduce emissions as much as possible, a complete disposal of the old appliance is required in authorized handling plants.
• Q: What are the hazardous substances present in this product?
  A: LCDs may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive.

Documents / Resources

BenQ RD320U, RD320UA LCD Monitor [pdf] Instruction Manual RD320U, RD320UA, RD320U RD320UA LCD Monitor, RD320U RD320UA, LCD Monitor, Monitor

References

• User Manual