B-TECH DD 700 Weighing Terminal
Unpacking and Installation
Take the terminal, quick start guide, USB with manual, and sealing screws out of the package.
Available connections
- A. Optional board slots
- B. Scale 1
- C. COM1 port
- D. COM2 port
- E. Terminal board for I/O.
- F. Serial USB port
- G. HOST USB port
- H Power supply 12 V (by means of external power supply)
- I Digital scale (optional) or Analog scale 2 (optional)
- J. Calibration Switch
- K. N/A
- L. 12V Power Supply Input
Install the terminal. Press 
to turn on the terminal.
Display
 |
Stable weight |  |
Zero |
 |
Tare |
 |
Tare
entered from keyboard |
 |
Minimum weight |  |
Gross weight in pounds |
 |
Weighing range indication |  |
Net weight |
 |
Weight within range indication |  |
Weight below range indication |
 |
Weight above range indication |
Keyboard
 |
Zero scale |
 |
Entering and deleting tare weight |
 |
Entering and deleting tare weight |  |
Printing and/ or starting transmission |
 |
Customizable
keys |
 |
Enter |
 |
Alphanumeric keys and symbols |  |
On/Off |
Truck In and Out (ID#)
Inbound
- Truck pulls on scale (light or heavy)
- Press “I.D. #” key (
on keypad) - Key in truck’s ID# (keys are alphanumeric like cellphone, so you may have to press a key repeatedly toget desired character or use the USB keyboard)
- Press Enter
key - Display returns to weight on scale withExample “RcD ID: 1234” below the weight.
- Press Print
key. - Ticket prints with time, date, ID# and inbound weight
Outbound
- Truck returns to scale (heavy or light)
- Press “I.D.#” key ( key on keypad)
- Key in truck’s ID# **If ID# is the same, just pressENTER, you don’t have to key it in again.**
- Press Enter key
- Display returns to weight on scale with
Example “RcD ID: 1234” and “Inbound W eight: 15000lb” below it. - Press Print key.
- Ticket prints with time, date, ID# and Gross, Tare, andNet weights.
**After outbound print, truck ID# is erased from memory and can be used again.**
800.266.8900 • Fax: 330.471.8909 Monday – Friday 7:00 AM – 5:00 PM www.B-TEK.com • sales@b-tek.com Technical Support: 330 754-3880 x2
Connection of Analog Load Cells (Female DB9 Connector
COM1 & COM2 Serial Port Connection in RS232 (Male DB9 Connector)
Connection of COM2 in RS422 Configuration (Male DB9 Connector)
800.266.8900 • Fax: 330.471.8909 Monday – Friday 7:00 AM – 5:00 PM www.B-TEK.com • sales@b-tek.com Technical Support: 330 754-3880 x2
Documents / Resources
 |
B-TECH DD 700 Weighing Terminal [pdf] User Guide DD 700, Weighing Terminal, DD 700 Weighing Terminal, Terminal |
