AUDIO ARRAY AM-W11 Wireless Mic
PACKAGE LIST
FUNCTION
TRANSMITTER
- Power Indicator
- Pair Indicator
- USB-C Charging Port
- Power Button/Pair Button
- Mic Jack
- Built-in Mic
- Clip
RECEIVER
- Power Indicator
- Pair Indicator
- USB-C Charging Port
- Vol-
- Power Button/Pair Button
- Vol+
- Headphone Output
- Clip
INSTRUCTIONS
Indicator
Operating
Power
Hold down the power button for 2 seconds to turn off the machine.
Pair
Automatically pairing when power on. To pair manually, please make sure both the receiver and transmitter are off power. In the meantime, hold down both the power button and volume(-) button of the RX receiver for 3 seconds to turn it on for pairing. Then, turn on the transmitter and it will pair automatically.
Install
The Transmitter can be clipped to your clothes. And the Receiver can be clipped to a camera/phone.
Connect
The receiver can output the audio to your device via 3.5mm TRS cable(camera) or 3.5mm TRRS cable(phone). Please choose the correct cable according to your device.
Record
The Transmitter can record your voice via the built-in mic (equipped with a Furry Windshield) or the extra Lavalier Microphone.
SPECIFICATIONS
Transmitter
Receiver
Microphone
Documents / Resources
 |
AUDIO ARRAY AM-W11 Wireless Mic [pdf] Instructions AM-W11 Wireless Mic, AM-W11, Wireless Mic, Mic |