Arrowhead Alarm Products NANO-O1 Single Output Expander Module for ESL System
Single output expander module for ESL system.
This module wires directly onto the ESL keypad bus. It features a single clean normally open contact, rated to 30VDC 100mA, making this device ideal from controlling garage doors and gate controllers.
Learning Optional Input
For the Input of a NANO-O1 to work on the Elite system, you need to learn it in to a user slot. This is done at address 18. In Installer mode press <PROGRAM> <18> <ENTER> then choose the user slot <21-100> and <ENTER><ENTER>, trigger the device. (this should stop the keypad beeping.) i.e. (device is now learnt in to user 30).
The User Slot can then be configure to, Trigger an output, Arm/Disarm, Panic Alarm. Please see the full programming manual for more information. www.aap.co.nz
ARROWHEAD ALARM PRODUCTS Ltd.
1A Emirali Road, Silverdale 0932, Auckland, NZ
Ph. 09 414 0085
www.aap.co.nz
Documents / Resources
![]() |
Arrowhead Alarm Products NANO-O1 Single Output Expander Module for ESL System [pdf] Instructions NANO-O1, Single Output Expander Module for ESL System, NANO-O1 Single Output Expander Module for ESL System, NANO-O1 Single Output Expander Module, Single Output Expander Module, Output Expander Module, Expander Module, Module |