AOC CU34G2XP LCD Monitor User Manual

AOC CU34G2XP LCD Monitor 
User Manual

www.aoc.com

Contents hide

6 Documents / Resources

6.1 References

Safety

National Conventions
The following subsections describe national conventions used in this document.

Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin.
This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will
protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can
injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when
installing the product and use mounting accessories recommended by the manufacturer. A product and
cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire
or electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate
hence overheating may cause a fire or damage to the monitor.
To avoid potential damage, for example the panel peeling from the bezel, ensure that the monitor does not tilt downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall
or on the stand:

Installed with stand

Cleaning

Clean the cabinet regularly with a water-dampened, soft cloth.

When cleaning use a soft cotton or microfiber cloth. The cloth should be damp and almost dry, do not allow liquid into the case.

Please disconnect the power cord before cleaning the product.

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY
and contact a Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphones and headphones output voltage and therefore the sound pressure level.

Setup

Contents in Box

*Not all signal cables (HDMI/DP cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.

Stand & Base Setup

Please setup or remove the base following the steps as below.
Please place the monitor on a soft and flat surface to prevent the scratch.

Setup:

Remove:

Specification for base screw: M6*13 mm (effective thread 5.5 mm)

AOC CU34G2XP LCD Monitor - Specification for base screw M613 mm.

Adjusting Viewing Angle

To achieve the best viewing experience, it is recommended that the user can make sure they are able to look at their whole face on the screen, then adjust the monitor’s angle based on personal preference.
Hold the stand so you will not topple the monitor when you change the monitor’s angle.
You are able to adjust the monitor as below:

NOTE:
Do not touch the LCD screen when you change the angle. Touching the LCD screen may cause damage.

WARNING:

To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

Connecting the Monitor

Cable Connections In Back of Monitor:

USB 3.2 Gen 1×2
USB3.2 Gen1+Quick Chargingx1

USB 3.2 Gen 1×1
USB-PC upstream

HDMIx2
DisplayPortx2

Earphone out
Power

Connect to PC

Connect the power cord to the back of the display firmly.
Turn off your computer and unplug its power cable.

Connect the display signal cable to the video connector on the back of your computer.
Plug the power cord of your computer and your display into a nearby outlet.

Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image,please refer to
Troubleshoot.

To protect equipment, always turn off the PC and LCD monitor before connecting.

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps:

Remove the base.

Follow the manufacturer’s instructions to assemble the wall mounting arm.
Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor.

Insert the 4 screws into the holes and tighten.
Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall.

AOC CU34G2XP LCD Monitor - This monitor can be attached to a wall mounting arm you purchase separately

Specification of wall hanger screws：M4*(10+X)mm, ( X=Thickness of Wall mount bracket )

AOC CU34G2XP LCD Monitor - Specification of wall hanger screws

NOTE: VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. Always contact manufacturer for wall-mount installation.

* Display design may differ from those illustrated.

WARNING:

To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

AMD FreeSync Premium function

AMD FreeSync Premium function is works with DP/HDMI
Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com

Graphics Cards

Radeon™ RX Vega series
Radeon™ RX 500 series

Radeon™ RX 400 series
Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）

Radeon™ Pro Duo (2016)
Radeon™ R9 Nano series

Radeon™ R9 Fury series
Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except

Processors

AMD Ryzen™ 7 2700U
AMD Ryzen™ 5 2500U
AMD Ryzen™ 5 2400G
AMD Ryzen™ 3 2300U
AMD Ryzen™ 3 2200G
AMD PRO A12-9800
AMD PRO A12-9800E
AMD PRO A10-9700
AMD PRO A10-9700E
AMD PRO A8-9600
AMD PRO A6-9500
AMD PRO A6-9500E
AMD PRO A12-8870
AMD PRO A12-8870E
AMD PRO A10-8770

AMD PRO A10-8770E
AMD PRO A10-8750B
AMD PRO A8-8650B

AMD PRO A6-8570
AMD PRO A6-8570E
AMD PRO A4-8350B

AMD A10-7890K
AMD A10-7870K
AMD A10-7850K

AMD A10-7800
AMD A10-7700K
AMD A8-7670K

AMD A8-7650K
AMD A8-7600
AMD A6-7400K

Adjusting

Hotkeys

Source/Exit
When the OSD is closed, press Source/Exit button will be Source hot key function.

Game Mode/<
When there is no OSD, press ”<” key to open game mode function, then press ”<” or “>” key to select game
mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.

Dial Point/>
When there is no OSD, press Dial Point button to active Dial Point menu, and then press “<” or “>” to set Dial
Point on or off.

Menu/Enter
Press to display the OSD or confirm the selection.

Power
Turn on/off the monitor.

OSD Setting

Basic and simple instruction on the control keys.

Notes:

If the product has only one signal input, the item of “Input Select” is unable to be adjusted the adjust option is disabled.
If the product screen size is 4:3 or input signal resolution is native resolution, the item of “Image Ratio” is disabled.
One of DCR, Color Boost and Picture Boost functions is activated, the other two function s are turned off accordingly.

Luminance

Note:
The function MBR and Overdrive Boost are available only when AMD FreeSync Premium is off and the vertical frequency is up to 75 Hz.

Color Setup

Picture Boost

Note:
Adjust the brightness, contrast, and position of the Bright Frame for better viewing experience

OSD Setup

Notes:
If the DP video content supports DP1.2, please select DP1.2 for DP Capability; otherwise, please select DP1.1.

PIP Setting

Game Setting

Extra

Exit

LED Indicator

Troubleshoot

Specification

General Specification

Preset Display Modes

Pin Assignments

20-Pin Color Display Signal Cable

Plug and Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows
the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.

Documents / Resources

AOC CU34G2XP LCD Monitor [pdf] User Manual
CU34G2XP LCD Monitor, CU34G2XP, LCD Monitor, Monitor

References

User Manual