SMART-CAM10
CAM10 Commaxx BV Smart Wifi Camera
ATTENTION!
Make sure that the SMART-CAM10 is within range of the router during the registration. The SMART-CAM10 can only be registered to one account. Make sure you remove the device from the app before changing ownership. See page 5. Keep away from liquids and humidity.
SPECIFICATIONS
Information Power Adapter: Manufacturers name and address : Shenzhen Keyu Power Supply Technology Co., Ltd., 2~3F, No. 13, Lane3, Yuquan East Road, the 2nd Industrial park, Yulv, Guangming District, 518000
Shenzhen, China. Model Identifier : Input voltage : Input AC frequency : Output voltage : Output current : Output Power : Average active efficiency : Efficiency at low 10% load : No load Power consumption : |
KA06E-0501000EU 100-240VAC 50/60 Hz 5.0V DC 1.0 A 5.0 W 75.0 % – 0.07 W |
Operating system: Image Sensor: IR distance: Resolution: Viewing Angle: Image Compression: SD-card supported: Wireless RF mode frequency band:Wireless communication protocol: Maximum transmitted power: Wireless Security Operate Temperature Operating Humidity Dimensions: |
Android 4.4+ or iOS9.0+ 1/2.7’’ Color CMOS sensor < 7 Meter 1920 x 1080 Px 107 x 57 Degrees H.264 SDXC-type Micro-SD 2412-2472 MHz WIFI 802.11 b/g/n 19.51 dBm WEP & WPA/WPA2 -10˚ ~ 45˚C 5%~85% non-condensing 115 x 60 x 60 mm |
EU DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type SMARTCAM10 is in compliance with Directive 2014/53/EU. The full text ofthe EU declaration of conformity is available at the following internetaddress:
http://DOC.hesdo.com/SMART-CAM10-DOC.pdf
Commaxx BV
Wiebachstraat 37
6466NG Kerkrade, NL
www.alectohome.com
Documents / Resources
![]() |
Alecto CAM10 Commaxx BV Smart Wifi Camera [pdf] User Guide CAM10 Commaxx BV Smart Wifi Camera, CAM10, Commaxx BV Smart Wifi Camera, BV Smart Wifi Camera, Smart Wifi Camera, Wifi Camera, Camera |