AKKO MOD007 Multi Modes Mechanical Keyboard User Manual

How do I change the backlight settings?
To adjust backlight settings, use the designated function keys as outlined in the user manual. You can change brightness levels, colours, and effects using the specified key combinations.
How do I switch between modes on the keyboard?
To switch between different modes (USB, Bluetooth, 2.4G), use the corresponding keys on the keyboard labelled for each mode (e.g., USBUSB, BT1, BT2, BT3, 2.4G).

How do I know if the keyboard is connected successfully?
The indicator lights on the keyboard will provide feedback on the connection status. Refer to the user manual for details on interpreting the indicator light signals.

Thank you for supporting AKKO
To provide you with a better user experience, please read this manual carefully before using the product.

Packing List

System Requirement

Windows®XP / Vista / 7 / 8 / 10 or higher version

USB Connection

Connect the keyboard to your computer by plugging the USB cable into an available USB port to start using it.

MOD007B PC Multi-modes RGB User Manua

Status	Indicator	Re-Connecting	Pairing	Connected
Bluetooth device 1	LED for Key E	The red light blinks slowly	The red light blinks fast	The red light stays on for 2 seconds and then turns off
Bluetooth device 2	LED for Key R	Blue light blinks slowly	Blue light blinks fast	The blue light stays on for 2 seconds and then turns off
Bluetooth device 3	LED for Key T	Yellow light blinks slowly	Yellow light blinks fast	The yellow light stays on for 2 seconds and then turns off
2.4G wireless device	LED for Key Y	Green light blinks slowly	Green light blinks fast	The green light stays on for 2 seconds and then turns off
Wired mode	LED for Key U	N/A	N/A	The white light stays on for 2 seconds and then turns off
Status	Indicator	Indicating mode
Low Battery	Independent LED Indicator (near spacebar)	The red light blinks slowly
Charging		Steady red
Fully Charged		Light off
Caps	LED for Caps Key	Steady white
Lock Win	LED for left Win Key	Steady white

HotKeys

Fn+	F1		My Computer
	F2		E-mail
	F3	=	Windows Search
	F4		Browser Homepage
	F5		Multimedia Player

Fn+	F6		Play/Pause
	F7		Previous Song
	F8	=	Next Song
	P		Print SCR
	C		Calculator

Fn+	I		Insert
	M		Mute
	<	=	Decrease Volume
	>		Increase Volume
	w		Swap WASD with ↑↓←→

System Commands

MOD007B PC System Commands (Windows)

Lock Windows Key
- Press Fn and Left Win Key

Restore Factory Settings
- Hold down Fn and press ~ Key for 5s
Revert Ctrl into the Menu Key
- Hold down Fn and press right Ctrl for 3s

MOD007B PC System Commands (Mac)

F1 Decrease display brightness
F2 Increase display brightness
F3 Open mission control
F4 Activate Siri
Right Alt Command Fn + (F1~12) F1 ～ F12
F7 Skip back (Audio)
F8 Pause/Play (Audio)
F9 Skip forward (Audio)
F10 Mute
F11 Volume down
F12 Volume up

Left Win Option
Left Alt Command

Backlight Settings

Wireless/Wired Connection Guide

Bluetooth Pairing

After turning on the keyboard, press Fn+E/R/T to enter Bluetooth mode. Press and hold the Fn+E/R/T combination key for 3 seconds to put the keyboard in pairing mode, with the red/blue/yellow indicator light flashing quickly. Once the connection is established, the indicator light will stay on for 2 seconds. If the device fails to connect, the indicator light will turn off and the keyboard will enter sleep mode.

2.4G Pairing
After turning on the keyboard, press Fn+Y to enter 2.4G mode. Then press and hold the Fn+Y combination key for 3 seconds to enter pairing mode. Then insert the receiver, and the indicator light will flash quickly. Once pairing is successful, the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indicator will turn off and the keyboard will enter sleep mode.

Battery Level Check

Press the Fn + Space combination keys to check the battery level. If the battery level is below 30%, the space key will show a red light. If it’s between 30-50%, the space key will show an orange light. If it’s between 50-70%, the space key will show a purple light. If it’s between 70-90%, the space key will show a yellow light. If it’s 90-100%, the space key will show a green light.

Key/Lighting Effects Customization Instruction

The driver can be connected and lighting and key can be customized under the three working modes of the keyboard
The three working modes of the keyboard can be matched to drive the music’s rhythm

Please download the Akko Cloud driver on our website
Users can download the driver via en.akkogear.com.

AKKO Warranty and Service Statement

Akko provides a One-Year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for a specific warranty policy.

If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss that happens during self-repair.
Defects resulting from disassembly of our product, improper usage and incorrect installation are not covered by warranty.
The return and warranty policy may vary on different platforms and are subject to the specific distributor at the time of purchase.

Contact Information

Company: Shenzhen Yinchen Technology Co., Ltd

Address: 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao’an District, Shenzhen, China.
Tel: 0755-23216420

Website: www.akkogear.com.
Origin: Shenzhen, China

WARNING:
Water and Beverages can’t be poured into the Keyboard.

Made in China.

Precautions
Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive force, etc.

www.akkogear.com

Documents / Resources

AKKO MOD007 Multi Modes Mechanical Keyboard [pdf] User Manual
MOD007 Multi Modes Mechanical Keyboard, MOD007, Multi Modes Mechanical Keyboard, Modes Mechanical Keyboard, Mechanical Keyboard, Keyboard

References

User Manual

AKKO MOD007 Multi Modes Mechanical Keyboard

Product Information

Product Usage Instructions