Actel SmartDesign LOGOSmartDesign MSS
Cortex™ -M3 Configuration
User Guide

Introduction

The SmartFusion Microcontroller Subsystem (MSS) contains an ARM Cortex-M3 microcontroller, a lowpower processor that features low gate count, low and predictable interrupt latency, and low-cost debug. It is intended for deeply embedded applications that require fast interrupt response features.
This document describes the ports that are available on the Cortex-M3 core in the SmartDesign MSS Configurator.
For more information about the specific implementation of the Cortex-M3 in the Actel SmartFusion device, please refer to the Actel SmartFusion Microcontroller Subsystem User’s Guide.

Configuration Options

There are no configuration options for the Cortex-M3 core in the SmartDesign MSS Configurator.

Actel SmartDesign MSS Cortex M3 Configuration - SmartFusion

Port Description

Port Name  Direction  PAD? Description 
RXEV In No Causes the Cortex-M3 to wake up from a WFE ( wait for event ) instruction.  The event
input, RXEV, is registered even when not waiting for an event, and so affects the next
WFE.
TXEV Out No Event transmitted as a result of a Cortex-M3 SEV ( send event ) instruction.  This is a
single-cycle pulse equal to 1 FCLK period.
SLEEP Out No This signal is asserted when the Cortex-M3 is in sleep now or sleep-on-exit mode, and
indicates that the clock to the processor can be stopped.
DEEPSLEEP Out No  This signal is asserted when the Cortex-M3 is in sleep now or sleep-on-exit mode when
the SLEEPDEEP bit of the System Control Register is set.

Note:
Non-PAD ports must be promoted manually to the top level from the MSS configurator canvas to be available as the next level of hierarchy.
Actel is the leader in low-power and mixed-signal FPGAs and offers the most comprehensive portfolio of system and power management solutions. Power Matters. Learn more at http://www.actel.com .

Actel Corporation
2061 Stierlin Court
Mountain View, CA
94043-4655 USA
Phone 650.318.4200
Fax 650.318.4600
Actel Europe Ltd.
River Court, Meadows Business Park
Station Approach, Blackwater
Camberley Surrey GU17 9AB
United Kingdom
Phone +44 (0) 1276 609 300
Fax +44 (0) 1276 607 540
Actel Japan
EXOS Ebisu Building 4F
1-24-14 Ebisu Shibuya-ku
Tokyo 150, Japan
Phone +81.03.3445.7671
Fax +81.03.3445.7668
http://jp.actel.com
Actel Hong Kong
Room 2107, China Resources Building
26 Harbour Road
Wanchai, Hong Kong
Phone +852 2185 6460
Fax +852 2185 6488
www.actel.com.cn

© 2009 Actel Corporation. All rights reserved. Actel and the Actel logo are trademarks of Actel Corporation. All other brand or product names are the property of their respective owners.

Actel SmartDesign LOGO5-02-00242-0

Documents / Resources

Actel SmartDesign MSS Cortex M3 Configuration [pdf] User Guide
SmartDesign MSS Cortex M3 Configuration, SmartDesign MSS, Cortex M3 Configuration, M3 Configuration

References

Leave a comment

Your email address will not be published. Required fields are marked *