B03 Bluetooth Remote Control Self Timer
“
Product Information
Specifications:
- Minimum distance: 5mm between the radiator and body
- Compliance: Innovation, Science and Economic Development
Canada’s licence-exempt RSSs - RF Compliance: Device used at 5mm from the body
- Accessories: Use only supplied or approved antenna; Avoid
metallic components in third-party accessories
Product Usage Instructions
Installation:
Ensure a minimum distance of 5mm between the radiator and your
body during installation.
Operation:
Operate the device in compliance with Innovation, Science and
Economic Development Canada’s licence-exempt RSSs.
Ensure that the device does not cause interference and can
accept any interference that may occur.
RF Exposure Awareness:
Be aware of RF exposure and ensure that the device operates
within FCC exposure limits by maintaining the specified distance
from the body.
Accessory Usage:
Avoid using body-worn accessories with metallic components. Use
only the supplied or approved antenna to comply with RF exposure
requirements.
FAQ (Frequently Asked Questions)
Q: Can I use third-party accessories with metallic components
with this device?
A: No, it is recommended to avoid using accessories with
metallic components to comply with RF exposure requirements.
“`
User Manual of Self timer This product is based on Bluetooth 5.0/5.2. It can remotely control the camera photographing function of the mobile phone through the button of the Bluetooth self timer, thus realizing remote control of the mobile phone photographing. This product also serves as Android and Apple systems. You can take photos and record videos by connecting Bluetooth without switching. Operation: 1: Press and hold the key to start the machine, and the blue light flashes. 2: Open the mobile phone “Settings”, find “Bluetooth”, and search for the Bluetooth device name: AB Shutter3. 3: Turn on “Camera” and click the self timer button to take pictures. Product specification: Bluetooth version: 5.0/5.2 Bluetooth distance; 10m Battery model: CR 2032 Service life: more than 3 months FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.
IC Warning This device complies with Innovation, Science and Economic Development Canada’s licenceexempt RSSs. Operation is subject to the following two conditions: (1)This device may not cause interference; (2)This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’innovation, sciences et développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1)l’appareil ne doit pas produire de brouillage, et (2)l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio.
The device complies with RF specifications when the device used at 5mm from the body. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
Documents / Resources
 |
AB Shutter3 B03 Bluetooth Remote Control Self Timer [pdf] User Manual B03, 2BMNI-B03, 2BMNIB03, B03 Bluetooth Remote Control Self Timer, B03, Bluetooth Remote Control Self Timer, Remote Control Self Timer, Self Timer, Timer |