QUICK START GUIDE
FB10C / FB10CS

WHAT’S IN THE BOX

KNOW YOUR PRODUCT

CONNECTING 2.4G DEVICE

1. Plug the receiver into the computer’s USB port.
2.  Turn the mouse power switch on.
3. Indicator：
   The red and blue light will flash (10S). The light will be off after connecting.

CONNECTING BLUETOOTH DEVICE 1
(For Mobile Phone/Tablet/Laptop)

1. Short-press the Bluetooth button and choose Device 1 (Indicator shows blue light for 5S).
2. Long-press the Bluetooth button for 3S and blue light flashes slowly when pairing.
3. Turn on the Bluetooth of your device, search and locate the BT name on the device: ［A4 FB10C］.
4. After the connection is established, the indicator will be solid blue for 10S then off automatically.

CONNECTING BLUETOOTH 2
(For Mobile Phone/Tablet/Laptop)

1. Short-press the Bluetooth button and choose Device 2 (Indicator shows red light for 5S).
2. Long-press the Bluetooth button for 3S and the red light flashes slowly when pairing.
3. Turn on the Bluetooth of your device, search and locate the BT name on the device: ［A4 FB10C］.
4. After the connection is established, the indicator will be solid red for 10S then off automatically.

INDICATOR

MOUSE	2.4G DEVICE	BLUETOOTH DEVICE 1	BLUETOOTH DEVICE 2

Indicator	Red and Blue Light	Blue Light	Red Light
Switch Device： Short-Press 1S	Flashes Quickly 10S	Solid Light 5S	Solid Light 5S
Pair Device： Long-Press For 3S	No Need to Pair	Pairing： Flashes Slowly Connected： Solid Light 10S	Pairing： Flashes Slowly Connected： Solid Light 10S

The above indicator status is before Bluetooth is paired. After the Bluetooth connection succeeds, the light will turn off after 10S.

CHARGING & INDICATOR

LOW BATTERY INDICATOR 

The flashing Red light indicates when the battery is below 25%.

Q & A

Question: How many total devices can be connected at a time?
Answer: Interchange and connect up to 3 devices at the same time. 2 Devices with Bluetooth +1 Device with 2.4G Hz.
Question: Does the mouse remember connected devices after power off?
Answer: The mouse will automatically remember and connect the last device. You may switch the devices as you choose to.
Question: How do I know what device is currently connected to?
Answer: When the power is turned on, the indicator light will be displayed for 10S.
Question: How to switch connected Bluetooth devices?
Answer: Repeat the procedure of connecting Bluetooth devices.

WARNING STATEMENT

The following actions may/will cause damages to the product.

1. To disassemble, bump, crush, or throw into the fire, you may cause irrefutable damage in event of the lithium battery leakage.
2. Do not expose to strong sunlight.
3. Please obey all local laws when discarding the batteries, if possible please recycle them.
   Do not dispose of it as household garbage, it may cause a fire or an explosion.
4. Please try to avoid charging in an environment below 0℃.
5. Do not remove or replace the battery.

http://www.a4tech.com

http://www.a4tech.com/manuals/fb10c/ Scan for E-Manual

Documents / Resources

A4TECH FB10CS Dual Mode Rechargeable Bluetooth Wireless Mouse [pdf] User Guide FB10CS, FB10C, Rechargeable Bluetooth Wireless Mouse

References

• User Manual