Product Information

The M3 Floor Sweeper is a versatile cleaning tool designed to efficiently sweep and collect debris from various floor surfaces. It is equipped with a front glass, support frame, bracket fixing plate, back mounting plate for the ceiling, connecting R-plate, ceiling fixing pipe, headlights, roof, and reflector.

Key Features:

• Front glass for visibility and protection
• Support frame for stability
• Bracket fixing plate for secure installation
• Back mounting plate for the ceiling for added support
• Connecting R-plate for structural reinforcement
• Ceiling fixing pipe for overhead attachment
• Headlights for enhanced visibility
• Roof for weather protection
• Reflector for increased visibility

Product Usage Instructions

1. STEP 1: Install the front glass
   • Use Hexagon screws M8*35 (2pcs) and go through the headlight line.
   • Plug it in.
2. STEP 2: Install the support frame
   • Use Flanged screws M8*20 (4pcs each side) to secure the support frame.
3. STEP 3: Install the bracket fixing plate
   • Use Flanged screws M6*12 (4pcs in total) to attach the bracket fixing plate.
4. STEP 4: Install the back mounting plate for the ceiling
   • Use Flanged screws M6*12 (2pcs each side) to mount the back plate.
5. STEP 5: Install the connecting R-plate
   • Use Flanged screws M6*12 to secure the connecting R-plate.
6. STEP 6: Install the ceiling fixing pipe
   • Use Flanged screws M6*25 and M6*12 to attach the ceiling fixing pipe.
7. STEP 7: Install the headlights
   • Use Flanged screws M6*12 to install the headlights.
8. STEP 8: Install the roof
   • Use Flanged screws M6*12 to secure the roof.
9. STEP 9: Install the reflector
   • Use Flanged screws M8*20 to attach the reflector.

Installation is now complete, and your M3 Floor Sweeper is ready for use.